ZyXEL Communications WAP3205 manual 117

Chapter 13 Troubleshooting

2Press the RESET button for one to five seconds to restart/reboot the WAP3205 v2.

3Press the RESET button for longer than five seconds to set the WAP3205 v2 back to its factory- default configurations.

If the WAP3205 v2 restarts automatically, wait for the WAP3205 v2 to finish restarting, and log in to the Web Configurator. The password is “1234”.

If the WAP3205 v2 does not restart automatically, disconnect and reconnect the WAP3205 v2’s power. Then, follow the directions above again.

13.5Wireless Router/AP Troubleshooting

I cannot access the WAP3205 v2 or ping any computer from the WLAN.

1Make sure the wireless adapter on the wireless station is working properly.

2Make sure the wireless adapter installed on your computer is IEEE 802.11 compatible and supports the same wireless standard as the WAP3205 v2.

3Make sure your computer (with a wireless adapter installed) is within the transmission range of the WAP3205 v2.

4Check that both the WAP3205 v2 and your wireless station are using the same wireless and wireless security settings.

	117
WAP3205 v2 User’s Guide