Chapter 4 Client Mode
Figure 10 Status: Client Mode
The following table describes the labels shown in the Status screen.
Table 6 Status Screen: Client Mode
LABEL | DESCRIPTION |
Logout | Click this at any time to exit the Web Configurator. |
|
|
Device Information |
|
|
|
Host Name | This is the WAP3205 v2’s model name. |
|
|
Firmware Version | This is the firmware version and the date created. |
|
|
Sys OP Mode | This is the device mode (Section 2.1.1 on page 15) to which the WAP3205 v2 is set - Client |
| Mode. |
|
|
LAN Information |
|
|
|
MAC Address | This shows the LAN Ethernet adapter MAC Address of your device. |
|
|
IP Address | This shows the LAN port’s IP address. |
|
|
IP Subnet Mask | This shows the LAN port’s subnet mask. |
|
|
DHCP | This shows the LAN port’s DHCP role - Client or None. |
|
|
WLAN Information |
|
|
|
WLAN OP Mode | This is the device mode (Section 2.1.1 on page 15) to which the WAP3205 v2’s wireless LAN |
| is set - Client Mode. |
|
|
MAC Address | This shows the wireless adapter MAC Address of your device. |
|
|
Status | This shows the current status of the Wireless LAN - ON. |
|
|
Connect Status | This shows whether or not the WAP3205 v2 has successfully associated with an access point |
| - Connected or Disassociated. |
|
|
802.11 Mode | This shows the wireless standard. |
|
|
Interface Status |
|
|
|
| 25 |
WAP3205 v2 User’s Guide | |
|
|