Chapter 4 Client Mode
Table 8 Client Mode: Wireless LAN > Profile > Add (continued)
LABEL | DESCRIPTION |
Network Name | Enter the name of the access point to which you are connecting. |
(SSID) | Click the Site Survey button to go to the Site Survey screen to see available wireless |
| |
| devices within transmission range. |
|
|
Security |
|
|
|
Security Mode | Select the security mode of the access point to which you want to connect. |
|
|
Apply | Click Apply to save your changes back to the WAP3205 v2. |
|
|
Back | Click Back to go back to the previous screen. |
|
|
4.6.1.1 No Security
Use this screen if the access point to which you want to connect does not use encryption. Figure 13 Client Mode: Wireless LAN > Profile: No Security
The following table describes the labels in this screen.
Table 9 Client Mode: Wireless LAN > Profile: No Security
LABEL | DESCRIPTION |
Wireless Setup |
|
|
|
Profile Name | Enter a descriptive name for this profile. |
|
|
Network Name | Enter the name of the access point to which you are connecting. |
(SSID) | Click the Site Survey button to go to the Site Survey screen to see available wireless |
| |
| devices within transmission range. |
|
|
Security |
|
|
|
Security Mode | Select No Security in this field. |
|
|
Apply | Click Apply to save your changes back to the WAP3205 v2. |
|
|
Back | Click Back to go back to the previous screen. |
|
|
4.6.1.2 Static WEP
Use this screen if the access point to which you want to connect to uses WEP security mode.
28 |
|
WAP3205 v2 User’s Guide | |
|
|