ZyXEL Communications WAP3205 Day, Off, Apply, Cancel, Bridge, AP + Bridge, For the following times, For the following times field

Chapter 10 Wireless LAN

Figure 66 Network > Wireless LAN > Scheduling

The following table describes the labels in this screen.

Table 41 Network > Wireless LAN > Scheduling

LABEL	DESCRIPTION
Wireless LAN Scheduling
Enable Wireless	Select this to enable Wireless LAN scheduling.
LAN Scheduling
Scheduling
WLAN Status	Select On or Off to specify whether the Wireless LAN is turned on or off. This field works
	in conjunction with the Day and For the following times fields.
Day	Select Everyday or the specific days to turn the Wireless LAN on or off. If you select
	Everyday you can not select any specific days. This field works in conjunction with the
	For the following times field.
For the following	Select a begin time using the first set of hour and minute (min) drop down boxes and
times (24-Hour	select an end time using the second set of hour and minute (min) drop down boxes. If
Format)	you have chosen On earlier for the WLAN Status the Wireless LAN will turn on between
	the two times you enter in these fields. If you have chosen Off earlier for the WLAN
	Status the Wireless LAN will turn off between the two times you enter in these fields.
Apply	Click Apply to save your changes back to the WAP3205 v2.
Cancel	Click Cancel to reload the previous configuration for this screen.

10.12 WDS Screen

A Wireless Distribution System (WDS) is a wireless connection between two or more APs. Use this screen to set the operating mode of your WAP3205 v2 to AP + Bridge or Bridge and establish wireless links with other APs. You need to know the MAC address of the peer device, which also must be in bridge mode.

98
	WAP3205 v2 User’s Guide