Chapter 14 Bandwidth Control
14.2 Bandwidth Control Setup
Click Advanced Application > Bandwidth Control in the navigation panel to bring up the screen as shown next.
Figure 76 Advanced Application > Bandwidth Control
The following table describes the related labels in this screen.
Table 34 Advanced Application > Bandwidth Control
LABEL | DESCRIPTION |
Active | Select this check box to enable bandwidth control on the Switch. |
|
|
Port | This field displays the port number. |
|
|
* | Settings in this row apply to all ports. |
| Use this row only if you want to make some settings the same for all ports. |
| Use this row first to set the common settings and then make adjustments |
| on a |
Note: Changes in this row are copied to all the ports as soon as you make them.
Ingress Rate
Active | Select this check box to activate commit rate limits on this port. |
|
|
Commit | Specify the guaranteed bandwidth allowed in kilobits per second (Kbps) for |
Rate | the incoming traffic flow on a port. The commit rate should be less than the |
| peak rate. The sum of commit rates cannot be greater than or equal to the |
| uplink bandwidth. |
|
|
Active | Select this check box to activate peak rate limits on this port. |
|
|
Peak | Specify the maximum bandwidth allowed in kilobits per second (Kbps) for |
Rate | the incoming traffic flow on a port. |
|
|
146 |
| |
| ||
|
|
|