Chapter 33 OSPF
Table 102 IP Application > OSPF Configuration > OSPF Virtual Link (continued)
LABEL | DESCRIPTION |
Key | When you select Simple in the Authentication field, enter a password |
| |
| When you select MD5 in the Authentication field, enter a password 16- |
| character long. |
|
|
Add | Click Add to save your changes to the Switch’s |
| Switch loses these changes if it is turned off or loses power, so use the |
| Save link on the top navigation panel to save your changes to the non- |
| volatile memory when you are done configuring. |
|
|
Cancel | Click Cancel to begin configuring this screen afresh. |
|
|
Clear | Click Clear to set the above fields back to the factory defaults. |
|
|
Index | This field displays an index number of an entry. |
|
|
Name | This field displays a descriptive name of a virtual link. |
|
|
Peer Router | This field displays the ID (that uses the format of an IP address in dotted |
ID | decimal notation) of a peer border router. |
|
|
Authenticatio | This field displays the authentication method used |
n | None, Simple or MD5). |
|
|
Key ID | When the Authentication field displays MD5, this field displays the |
| identification number of the key used. |
|
|
Delete | Click Delete to remove the selected entry from the summary table. |
|
|
Cancel | Click Cancel to clear the Delete check boxes. |
|
|
290 |
| |
| ||
|
|
|