Chapter 24 Multicast
Table 62 Advanced Application > Multicast > Multicast Setting > IGMP Filtering Profile (continued)
LABEL | DESCRIPTION |
Delete | To delete the profile(s) and all the accompanying rules, select the |
| profile(s) that you want to remove in the Delete Profile column, then |
| click the Delete button. |
| To delete a rule(s) from a profile, select the rule(s) that you want to |
| remove in the Delete Rule column, then click the Delete button. |
|
|
Cancel | Click Cancel to clear the Delete Profile/Delete Rule check boxes. |
|
|
24.6 MVR Overview
Multicast VLAN Registration (MVR) is designed for applications (such as
MVR allows one single multicast VLAN to be shared among different subscriber VLANs on the network. While isolated in different subscriber VLANs, connected devices can subscribe to and unsubscribe from the multicast stream in the multicast VLAN. This improves bandwidth utilization with reduced multicast traffic in the subscriber VLANs and simplifies multicast group management.
MVR only responds to IGMP join and leave control messages from multicast groups that are configured under MVR. Join and leave reports from other multicast groups are managed by IGMP snooping.
The following figure shows a network example. The subscriber VLAN (1, 2 and 3) information is hidden from the streaming media server, S. In addition, the multicast VLAN information is only visible to the Switch and S.
Figure 106 MVR Network Example
VLAN 1 |
|
|
| Multicast VLAN S | |||||||||||||||||
| |||||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
VLAN 2
VLAN 3
24.6.1 Types of MVR Ports
In MVR, a source port is a port on the Switch that can send and receive multicast traffic in a multicast VLAN while a receiver port can only receive multicast traffic.
| 207 |
|
|