Chapter 9 VLAN
9.5.1 VLAN Status
See Section 9.1 on page 95 for more information on Static VLAN. Click Advanced Application > VLAN from the navigation panel to display the VLAN Status screen as shown next.
Figure 46 Advanced Application > VLAN: VLAN Status
The following table describes the labels in this screen.
Table 15 Advanced Application > VLAN: VLAN Status
LABEL | DESCRIPTION |
VLAN Search | Enter an existing VLAN ID number(s) (separated by a comma) and click |
by VID | Search to display only the specified VLAN(s) in the list below. |
| Leave this field blank and click Search to display all VLANs configured on |
| the Switch. |
|
|
The Number | This is the number of VLANs configured on the Switch. |
of VLAN |
|
|
|
The Number | This is the number of VLANs that match the searching criteria and display |
of Search | in the list below. |
Results | This field displays only when you use the Search button to look for |
| |
| certain VLANs. |
|
|
Index | This is the VLAN index number. Click on an index number to view more |
| VLAN details. |
|
|
VID | This is the VLAN identification number that was configured in the Static |
| VLAN screen. |
|
|
Elapsed Time | This field shows how long it has been since a normal VLAN was registered |
| or a static VLAN was set up. |
|
|
Status | This field shows how this VLAN was added to the Switch; dynamic - |
| using GVRP, static - added as a permanent entry or other - added in |
| another way such as via Multicast VLAN Registration (MVR). |
|
|
Change Pages | Click Previous or Next to show the previous/next screen if all status |
| information cannot be seen in one screen. |
|
|
| 99 |
|
|