Chapter 33 OSPF
Table 96 OSPF Status: Common Output Fields (continued)
FIELD | DESCRIPTION |
Seq # | This field displays the link sequence number of the LSA. |
|
|
Checksum | This field displays the checksum value of the LSA. |
|
|
Link Count | This field displays the number of links in the LSA. |
|
|
33.3 OSPF Configuration
Use this screen to activate OSPF and set general settings. Click IP Application > OSPF and the Configuration link to display the OSPF Configuration screen. See Section 33.1 on page 277 for more information on OSPF.
Figure 151 IP Application > OSPF Configuration: Activating and General Settings
The follow table describes the related labels in this screen.
Table 97 IP Application > OSPF Configuration: Activating and General Settings
LABEL | DESCRIPTION |
Active | OSPF is disabled by default. Select this option to enable it. |
|
|
Router ID | Router ID uniquely identifies the Switch in an OSPF. Enter a unique ID (that |
| uses the format of an IP address in dotted decimal notation) for the Switch. |
|
|
Apply | Click Apply to save your changes to the Switch’s |
| Switch loses these changes if it is turned off or loses power, so use the Save |
| link on the top navigation panel to save your changes to the |
| memory when you are done configuring. |
|
|
Cancel | Click Cancel to begin configuring this screen afresh. |
|
|
282 |
| |
| ||
|
|
|