Chapter 4 The Web Configurator

Table 5 Navigation Panel Links (continued)

LINK

DESCRIPTION

VLAN Mapping

This link takes you to screens where you can configure VLAN mapping

 

settings on the Switch.

 

 

Layer 2

This link takes you to a screen where you can configure L2PT (Layer 2

Protocol

Protocol Tunneling) settings on the Switch.

Tunneling

 

 

 

Private VLAN

This link takes you to a screen where you can block traffic between ports

 

in a VLAN on the Switch.

 

 

IP Application

 

 

 

Static Route

This link takes you to a screen where you can configure static routes. A

 

static route defines how the Switch should forward traffic by configuring

 

the TCP/IP parameters manually.

 

 

RIP

This link takes you to a screen where you can configure the RIP (Routing

 

Information Protocol) direction and versions.

 

 

OSPF

This link takes you to screens where you can view the OSPF status and

 

configure OSPF settings.

 

 

IGMP

This link takes you to a screen where you can configure the IGMP

 

settings.

 

 

DVMRP

This link takes you to a screen where you can configure the DVMRP

 

(Distance Vector Multicast Routing Protocol) settings.

 

 

DiffServ

This link takes you to screens where you can enable DiffServ, configure

 

marking rules and set DSCP-to-IEEE802.1p mappings.

 

 

DHCP

This link takes you to screens where you can configure the DHCP

 

settings.

 

 

VRRP

This link takes you to screens where you can configure redundant virtual

 

router for your network.

 

 

Management

 

 

 

Maintenance

This link takes you to screens where you can perform firmware and

 

configuration file maintenance as well as reboot the system.

 

 

Access Control

This link takes you to screens where you can change the system login

 

password and configure SNMP and remote management.

 

 

Diagnostic

This link takes you to screens where you can view system logs and can

 

test port(s).

 

 

Syslog

This link takes you to screens where you can setup system logs and a

 

system log server.

 

 

Cluster

This link takes you to a screen where you can configure clustering

Management

management and view its status.

 

 

MAC Table

This link takes you to a screen where you can view the MAC address and

 

VLAN ID of a device attach to a port. You can also view what kind of

 

device it is.

 

 

IP Table

This link takes you to a screen where you can view the IP addresses and

 

VLAN ID of a device attached to a port.You can also view what kind of

 

device it is.

 

 

ARP Table

This link takes you to a screen where you can view the MAC address – IP

 

address resolution table.

 

 

50

 

XGS-4728F User’s Guide