Chapter 4 The Web Configurator

 

Table 5 Navigation Panel Links (continued)

 

LINK

DESCRIPTION

 

Routing Table

This link takes you to a screen where you can view the routing table.

 

 

 

 

Configure

This link takes you to a screen where you can copy attributes of one port

 

Clone

to (an)other port(s).

 

 

 

4.3.1 Change Your Password

After you log in for the first time, it is recommended you change the default administrator password. Click Management > Access Control > Logins to display the next screen.

Figure 18 Change Administrator Login Password

4.4 Saving Your Configuration

When you are done modifying the settings in a screen, click Apply to save your changes back to the run-time memory. Settings in the run-time memory are lost when the Switch’s power is turned off.

Click the Save link in the upper right hand corner of the web configurator to save your configuration to nonvolatile memory. Nonvolatile memory refers to the Switch’s storage that remains even if the Switch’s power is turned off.

Note: Use the Save link when you are done with a configuration session.

 

51

XGS-4728F User’s Guide