Chapter 40 Access Control
40.3.4 Configuring SNMP
From the Access Control screen, display the SNMP screen. You can click Access Control to go back to the Access Control screen.
Figure 205 Management > Access Control > SNMP
The following table describes the labels in this screen.
Table 129 Management > Access Control > SNMP
LABEL | DESCRIPTION |
General Setting | Use this section to specify the SNMP version and community (password) |
| values. |
|
|
Version | Select the SNMP version for the Switch. The SNMP version on the Switch |
| must match the version on the SNMP manager. Choose SNMP version 2c |
| (v2c), SNMP version 3 (v3) or both (v3v2c). |
| Note: SNMP version 2c is backwards compatible with SNMP |
| version 1. |
|
|
Get Community | Enter the Get Community string, which is the password for the |
| incoming Get- and GetNext- requests from the management station. |
| The Get Community string is only used by SNMP managers using |
| SNMP version 2c or lower. |
|
|
Set Community | Enter the Set Community, which is the password for incoming Set- |
| requests from the management station. |
| The Set Community string is only used by SNMP managers using |
| SNMP version 2c or lower. |
344 |
| |
| ||
|
|
|