|
| Chapter 25 AAA |
| Table 66 Advanced Application > AAA > RADIUS Server Setup (continued) | |
| LABEL | DESCRIPTION |
| Shared Secret | Specify a password (up to 32 alphanumeric characters) as the key to be |
|
| shared between the external RADIUS accounting server and the Switch. |
|
| This key is not sent over the network. This key must be the same on the |
|
| external RADIUS accounting server and the Switch. |
|
|
|
| Delete | Check this box if you want to remove an existing RADIUS accounting |
|
| server entry from the Switch. This entry is deleted when you click Apply. |
|
|
|
| Apply | Click Apply to save your changes to the Switch’s |
|
| Switch loses these changes if it is turned off or loses power, so use the |
|
| Save link on the top navigation panel to save your changes to the non- |
|
| volatile memory when you are done configuring. |
|
|
|
| Cancel | Click Cancel to begin configuring this screen afresh. |
|
|
|
25.2.2 TACACS+ Server Setup
Use this screen to configure your TACACS+ server settings. See Section 25.1.2 on page 216 for more information on TACACS+ servers. Click on the TACACS+ Server Setup link in the Authentication and Accounting screen to view the screen as shown.
Figure 117 Advanced Application > AAA > TACACS+ Server Setup
| 219 |
|
|