|
|
| Chapter 33 OSPF |
| Table 99 | IP Application > OSPF Configuration: Summary Table (continued) | |
| LABEL |
| DESCRIPTION |
| Stub |
| This field displays whether an area is a stub network (Yes) or not (No). |
| Network |
|
|
|
|
|
|
| Delete |
| Click Delete to remove the selected entry from the summary table. |
|
|
|
|
| Cancel |
| Click Cancel to clear the Delete check boxes. |
|
|
|
|
33.5 Configuring OSPF Redistribution
Use this screen to configure route redistribution and summary addresses. Route redistribution is used when other routers which use RIP routing protocol and/or static routes need to exchange routing information with the Switch using OSPF routing protocol. A summary address is used to cover more than one routing entries in order to reduce the routing table size.
In the OSPF Configuration screen, click Redistribute to display the OSPF Redistribution screen.
Figure 154 IP Application > OSPF Configuration > Redistribute
The following table describes the labels in this screen.
Table 100 IP Application > OSPF Configuration > Redistribute
LABEL | DESCRIPTION |
Redistribute | Route redistribution allows your Switch to import and translate external |
Route | routes learned through RIP routing protocol or configured manually |
| (Static) into the OSPF network transparently. |
|
|
Active | Select this option to activate route redistribution for routes learned through |
| the selected protocol. |
|
|
| 285 |
|
|