PRESENTATION
Cutting unit
Rider 1030 has a Bioclip unit which cuts the grass finely by cutting it several times before it is returned to the lawn as fertiliser.
The cutting unit on Rider 1200 has rear ejection, i.e. the grass cuttings are thrown out behind the cutting unit.
Lift lever for cutting unit
The lift lever is used to set the cutting unit in transport or mowing position.
1.Pull back the lever to the locked position for transport.
The cutting unit will lift up and the blades stop rotating.
2.Press in the lock button and move the lever forwards for the mowing position.
The unit will lower down and the blades start to rotate.
3.The lever can also be used to temporarily regulate the cutting height, e.g. for a small mound in the lawn.
Lifting of the cutting unit
Lowering of the cutting unit
English – 11