Husqvarna 1030 BioClip These instructions are for your safety. Read them carefully, General use

Page 7

SAFETY INSTRUCTIONS

These instructions are for your safety. Read them carefully.

!This symbol implies that important safety rules are applicable. This is for your safety and the operating reliability of the machine.

General use:

Make yourself familiar with the controls and how to stop quickly.

Read all the instructions in Operator’s Manual and on the machine before starting it. Make sure you understand them, and then follow them.

Only allow adults who are familiar with the machine to use it.

Wear approved safety glasses or a visor during assembly and driving.

Never use the machine barefoot. Always wear heavy-duty shoes, preferably toe-capped.

Never wear loose fitting clothes which can fasten in moving parting.

Clear the area of objects such as stones, toys, and wires, etc. which can be caught up by the blades and thrown out.

Check that there are no other persons in the area before starting to cut.

Stop the machine if anyone comes into the work area.

Never carry passengers.

Do not cut backwards unless absolutely neces- sary.

Always look down and behind before and during reversing.

Keep an eye on the ejected grass and do not direct it towards anyone.

Slow down before turning.

Never leave the machine unattended when the engine is running. Always switch off the blades, pull on the parking brake, stop the engine and take out the keys before leaving the machine.

Switch off the blades when you are not cutting.

Only cut in daylight or good artificial lighting.

Never use the machine when you have con- sumed alcohol, drugs, or certain medicines.

R I D E R 9 7 0

Read the instructions before starting the machine.

Clear the area from stones etc. before cutting.

R I D E

 

 

R 8 5 0

 

 

RID

ER

850

 

Never carry passengers.

!WARNING!

This machine can cut off hands and feet, and eject objects. Failure to follow the safety instructions can lead to severe injury.

English – 5

Image 7
Contents 101 89 Rider 1030 BioClip RiderSvenska Contents II. Slope operation Safety InstructionsSafe operation practices for ride-on mowers General operationIV. Service Read the instructions Explanation of SymbolsGeneral use These instructions are for your safety. Read them carefullyDo as follows Driving on slopesChildren MaintenanceDo not do the following Never drive the machine in an enclosed space Presentation PresentationLocation of the controls Choke lever Throttle controlSpeed limiter Lift lever for cutting unit Cutting unitFuelling Lever for adjustment of the cutting heightParking brake SeatBefore starting DrivingStarting the engine Driving the machine Cutting tips MAX Stopping the engineDisengage lever Hours MaintenanceMaintenance schedule Daily Maintenance intervalRight-hand fender Dismantling of the machine hoodsEngine hood Front hoodCheck the engine’s cooling air intake Check the engine’s oil levelChecking of the fuel pump’s air filter Check the transmission’s oil level Check the transmission’s air intakeChecking and adjustment of the steering wires Poorly adjusted brakes can result in reduced braking power Checking and adjusting the brakeCheck the level of the battery acid Check the safety systemReplacing the air filter Do not use compressed air to clean the paper filterMaintenance Checking and adjusting the cutting unit’s parallelism Checking the blades Dismantling the cutting unitChanging the oil Lubrication Replacement of the oil filterGeneral lubrication Checking and adjustment of the throttle wire Checking the tyre pressure Replacement of the fuel filterProblem Procedure Trouble Shooting ScheduleStorage ServiceWinter storage Wiring Diagram Rider 1030 Bioclip, Rider Technical DataEnglish «*2h6+¬ English «*2h6+¬