TROUBLESHOOTING | |
|
|
|
|
CUTTING HEAD WILL NOT ADVANCE LINE |
|
CAUSE | ACTION |
Cutting head bound with grass | Stop the unit and clean cutting attachment |
Cutting head out of line | Refill with new line |
Inner reel bound up | Replace the inner reel |
Cutting head dirty | Clean inner reel and outer spool |
Line welded | Disassemble, remove the welded section |
| and rewind the line |
Line twisted when refilled | Disassemble and rewind the line |
Not enough line is exposed | Push the bump knob and pull out line until |
| 4 inches (102 mm) of line is outside of the |
| cutting attachment |
|
|
CUTTING LINE ADVANCES UNCONTROLLABLY |
|
CAUSE | ACTION |
Oil, cleaner, or lubricant in cutting head | Clean and thoroughly dry the cutting head |
If further assistance is required, contact your authorized service dealer.
12