Remington 109312-01 Cleaning and Maintenance, Clearing Tines Foreign Objects, Cleaning Tiller

Page 9

OWNER’S MANUAL

OPERATING TILLER

Continued

CLEARING TINES OF

FOREIGN OBJECTS

During use, a stone or root could become lodged in the tines, or tall grass or weeds may become wrapped around the tine shaft.

To clear the tines, release the trigger lever. Unplug the tiller, and dislodge or remove any obstacles from the tines or tine shaft.

WARNING: Always unplug the tiller before placing hands near the tines. Always wear gloves to protect your hands from the sharp edges of the tines.

To ease removal of tall grass or weeds that are wrapped around the tine shaft, remove one or more of the tines from the tine shaft. See Tine Removal and Installation, page 6.

When you have cleared the tines, reinstall tines onto tine shaft. Plug the tiller power cord into the extension cord. Firmly grasp the grip area of the handlebar with both hands and resume normal tilling operation.

CLEANING AND MAINTENANCE

WARNING: Unplug tiller from power source before cleaning or servicing. Severe injury or death could occur from fire, electrical shock, or body contact with mov- ing tines.

WARNING: When cleaning tiller:

Do not submerge tiller in any liquids.

Do not use products that contain ammonia, chlorine, or abrasives.

Do not use chlorinated clean- ing solvents, carbon tetrachlo- ride, kerosene, or gasoline.

CLEANING TILLER

1.To clean front and rear cover and fender, use a soft cloth dampened with a mild soap and water mixture. Do not spray or pour water directly onto the front or rear cover. Wipe the front and rear covers and fender with the damp- ened cloth.

2.To remove soil and debris from the tines and transmission, use a stiff brush or a dampened cloth. Do not spray or pour water directly onto tiller.

3.For easier cleaning, remove the tines from the tine shaft. See Tine Removal and Installation, page 6.

4.Once cleaned, wipe the tine shaft dry and apply a light coat of oil to the shaft before reinstalling the tines.

CHECKING TRANSMISSION LUBRICANT

1.Unplug tiller from power source.

2.Locate the grease filler screw located above the tine shaft on the right side of the transmission (see Figure 14).

3.Lay the tiller on its left side. Remove the right side tine sets for easy access to grease filler screw. See Tine Removal and Installation, page 6.

4.Clean the transmission to prevent dirt and debris from entering the transmission.

5.Using a Phillips head screwdriver, re- move the grease filler screw from the transmission case.

6.If grease is not visible in the hole, add a high-quality, automotive-grade, petro- leum-based grease using standard grease gun. Place the nozzle of the grease gun firmly against the rim of the hole and add grease until it begins to seep out around the edge of the nozzle.

7.Reinstall the grease filler screw and wipe away any excess grease.

8.Reassemble the tine sets. See Tine Re- moval and Installation, page 6.

Grease Filler

Screw

Figure 14 - Grease Filler Screw

OTHER SUGGESTED LUBRICATION POINTS

Handlebar Adjustment Knobs: Occa- sionally spray a silicone type lubricant around the saddle bolts.

Tine Shaft: After each use, remove the tines, clean the tine shaft with fine sandpa- per and apply a light coat of oil to the tine shaft. This will make future tine installation and removal easier.

109363

9

For more information, visit www.desatech.com

Image 9
Contents Garden Wizard Electric Tiller Read ALL Instructions Before Operating Tiller SafetyWhile Operating Tiller 120 100 150Maintenance Storage of Tiller Product Identification Unpacking Unfolding and Adjusting Handlebar AssemblyAdjusting Height of Handlebar Unfolding HandlebarTine Removal Installation Adjusting Wheel AssemblyAdjusting the Wheel Assembly for Transport Adjusting the Wheel Assembly for TillingExtension Cords Operating TillerRetaining Extension Cord Circuit Breaker ProtectionStarting Tiller Basic Tiller OperationExtension Cord Management Cleaning Tiller Cleaning and MaintenanceClearing Tines Foreign Objects Checking Transmission LubricantIllustrated Parts Breakdown Electric TillerModel Assembling Fender to Transmission Model Parts ListTroubleshooting Technical ServiceRepair Service Parts Dealers Authorized Service CentersIllinois IL North Dakota ND Electric Tiller Limited Warranty Garden Wizard Mientras Opera EL Cultivador Advertencias Sobre SeguridadLEA Todas LAS Instrucciones Antes DE Operar EL Cultivador 10-12Mantenimiento Y Almacenamiento DEL Cultivador Manual DEL PropietarioDesempaque Identificación DEL ProductoDesdoblamiento Y Regulación DEL Manubrio EnsambleDesdoblamiento del manubrio Regulación de la altura del manubrioRetiro E Instalación DE LA PÚA Regulación DEL Conjunto RuedaRegulación del conjunto rueda para el transporte Regulación del conjunto rueda para cultivarCordones DE Extensión Operación DEL CultivadorSujeción DEL Cordón DE Extensión Protección CON DisyuntorArranque DEL Cultivador Operación Básica DEL CultivadorManejo DEL Cordón DE Extensión Retiro DE Objetos Extraños DE LAS Púas Limpieza Y MantenimientoLimpieza DEL Cultivador Revisión DEL Lubricante DE LA TransmisiónDesarme Ilustrado DE Partes Cultivador EléctricoModelo Ensamble del guardabarros a la transmisión Modelo Lista DE PartesAnálisis DE Averías Servicio TécnicoServicio DE Reparación Centro DE Servicio Autorizado Distribuidores DE RepuestosIllinois IL North Dakota ND Garantía Limitada DEL Cultivador Eléctrico Garden Wizard Cultivateur Électrique Lire Toutes LES Instructions Avant Dutiliser LE Cultivateur Avertissements Relatifs À LA SécuritéEN Cours Dutilisation DU Cultivateur 120 15,20 30,50 45,75Entretien ET Remisage DU Cultivateur Manuel DutilisationDéballage Identification DU ProduitDépliage ET Réglage DE LA BARRE-POIGNÉE AssemblageDépliage de la barre-poignée Réglage de la hauteur de la barre-poignéeRéglage de lassemblage des roues pour le déplacement Retrait ET Installation DES DentsRetrait et installation des dents Réglage DE Lassemblage DES RoutesCordons Prolongateurs Utilisation DU CultivateurMaintien DU Cordon Prolongateur Protection PAR DisjoncteurDémarrage DU Cultivateur Bases Dutilisation DU CultivateurManiement DU Cordon Prolongateur Dégagement DES Dents DE Corps Étrangers Nettoyage ET EntretienNettoyage DU Cultivateur Vérification DU Lubrifiant DE LA TransmissionIllustration Détaillée DES Pièces Cultivateur ÉlectriqueModèle Pose du garde-boue sur la transmission Modèle Liste DES PiècesService DE Réparations Service TechniqueDépannage Réparation Sous GarantieCentres DE Réparations Agréés Concessionnaires DE PiècesIllinois IL North Dakota ND Garantie Limitée DU Cultivateur Électrique