OPERATION – PRE–START PROCEDURE
1.Fill system fuel tank with clean, fresh diesel fuel. CAUTION: Wipe up any and all fuel spillage.
2.Fill engine crankcase to full mark with clean, fresh lubricating oil per attached engine operating guide.
3.Radiator coolant should be checked at the beginning of each day and filled in compliance with the engine manufacturer’s guidelines.
4.Secure the generator for operation.
Skid mounted – the power generating system should be mounted to a smooth, hard surface suitable for supporting the system under all stress conditions.
Trailer mounted – block wheels to prevent accidental movement.
Adequate clearance must be provided for access doors to fully open.
NOTE: The generating system exhaust also exits radiator end. When positioning a generator system ensure position does not cause a concentration of toxic emissions.
14