M300EU OPERATING INSTRUCTIONS | M300EU |
| Addendum to M300E/EM Manual P/N 04288 |
ANALOG OUTPUT SIGNAL TYPE AND RANGE SELECTION
The information found in Section 6.13.5.2 of the M300E/EM Operators Manual (P/N 04288) is applicable to the M300EU with the following exception(s):
•There are minor differences in the displays ( e.g. CONC_OUT_2 instead of DATA_OUT_2) User Notes:
TURNING THE ANALOG OUTPUT OVER-RANGE FEATURE ON/OFF
The information found in Section 6.13.5.3 of the M300E/EM Operators Manual (P/N 04288) is applicable to the M300EU with the following exception(s):
•There are minor differences in the displays ( e.g. CONC_OUT_2 instead of DATA_OUT_2) User Notes:
ADDING A RECORDER OFFSET TO AN ANALOG OUTPUT
The information found in Section 6.13.5.4 of the M300E/EM Operators Manual (P/N 04288) is applicable to the M300EU with the following exception(s):
•There are minor differences in the displays ( e.g. CONC_OUT_2 instead of DATA_OUT_2) User Notes:
NOT APPLICABLE SECTIONS
The following sections of the M300E/EM Operators Manual (P/N 04288) relating to configuration of the analog outputs DO NOT apply to the M300EU.
•6.13.5.6 REPORTING GAS CONCENTRATIONS VIA THE M300E/EM ANALOG OUTPUT CHANNELS
•6.13.5.7 SETTING THE REPORTING RANGE SCALE FOR AN ANALOG OUTPUT
•6.13.5.8 SETTING DATA UPDATE RATE FOR AN ANALOG OUTPUT
•6.13.5.9 TURNING AN ANALOG OUTPUT ON OR OFF
36 | 05831 Rev. 01 |