Sanyo POA-MD13NET2 owner manual Connection of LAN cable

Page 15

Connection of LAN cable

Connection of LAN cable

To connect to the network, it is required to use the UTP (Unshielded Twisted Pair) strait cable with RJ-45 plug. There are two different types of cables depending on whether the network is constructed with 10Base-T or 100Base-TX. Prepare the Hub (10Base-T or 100Base-TX) to distribute the network cable if required.

1 Turn the Mains switch off.

2 Wind the UTP straight cable once around the ferrite core (supplied) as the illustrated below.

Mains Switch

Ferrite Core

3 Connect the UTP straight cable to the LAN port on the network board.

4 Connect the UTP straight cable to the hub.

Hub

(10Base-T, 100Base-TX)

Projector

UTP straight cable

ENGLISH

✐Use the UTP cross cable when you connect the computer and projector directly not using the hub.

✐When you connect the projector into the 10Base-T network, use cable with category 3 or 5. When you connect the projector into the 100Base-TX network, use cable with category 5.

✐The length of cable between hub and projector should be less than 100m.

Network Board

OWNER’S MANUAL

15

Image 15

Contents Network Board Installation and Operation of the Network BoardFederal Communication Commission Notice ComplianceContents Use of Serial Port Chapter Controlling the Multi-ProjectorsChapter AppendixBChapter Preparation Features Web Management function p.36Mail Alert function p.32 Automatic On/Off using Timer function p.47 Multi-control function p.56Control port ready for external equipment via network p.62 Operating Environment Operating Environment Expression/Abbreviation Use of this manualTrademark Chapter Installation Set up is completed Flow of installationName and function of each part Mounting Installation and Network configurationConnection of LAN cable Selection of network menu Network configuration Type1Configure the network Confirmation of the network menuHow to enter the numbers Completing of installationRestart the Network board Fixing the Network PIN code Network PIN code settingDisplaying Network PIN code menu Entering the Network PIN codeHow to enter the numbers with the screen 10-key pallet Selection of network menu Network Network configuration Type2Network Setting Password setting Display English Installation Chapter Basic Setting and Operation Login the setting page of the projector Select a display mode and loginEnter the IP address Main setting page in the Graphic Mode display Display of main settingMain setting page in the Text Mode display Language Setting Initial SettingsDate/Time Setting Password SettingNetwork Configuration Configure the networkName the projector Registering Smtp Server*1, Administrator Address Mail SettingCondition selection for sending alert message Registering and deleting E-mail addressesExamples Type and contents of alert mail Chapter Controlling the Projector Power on/off the projector Items Description Check the status of projectorInput Control the projectorPicture PC AdjustmentLoad a Set Save a SetSystem Adjustment Available selection when the VIDEO/S-VIDEO inputAvailable selection when the Y, Cb/Pb, Cr/Pr input Image adjustment values Image AdjustmentLoad a image mode Save a image adjustment valueSound Adjustment Screen AdjustmentFreeze................Sets the image frozen mode Power SettingSwitching two lamps About Lamp Counter resetSets the HD data wireless Check the Timer events How to set the TimerGetting the current time Cancel the timerIng on the projectors function ServiceCheck the Save items Save Actual AdjustmentLoad a control set Projector Control the projectors menuMake a memo Chapter Controlling the Multi-Projectors Internet Intranet Multi-ControlCheck IP address and projector name Register IP address and projector nameStatus Exclude/Add/Delete a projectorControl Load and apply the setting valueControl multi-projectors at the same time Chapter Use of Serial Port Connected to the serial port Serial Port settingSerial Port Setting Example Control ExamplesSerial Port Switching Preparation Use of TelnetFor example, entering pass- word Control the projector with Telnet Command list tableChapter AppendixA Connection examples Web browser setting Technical dataPeer-To-Peer connection Examples of ConnectionTheater Gateway Router installed in the networkWeb browser setting Active Script/JavaScript enableProxy setting Internet Explorer ActiveScript setting Examples OS/BrowsersWindows XP Professional Proxy setting Netscape Navigator JavaScript Setting Proxy setting Mac OS Internet Explorer ActiveScript settingProxy setting Netscape Navigator JavaScript Setting Proxy setting TCP/IP Product specificationPort Specification LAN port specificationSerial port specification AppendixB Why doesn’t the setting page appear in my web browser? Installation/AccessHow can I restrict access from the computer What should I do when I forget the password? Password/LoginOperation Can I control the projector by using the telnet application? Why am I not receiving E-mail alert messages?Can I update the firmware of the Network Board What are the rules for IP address assignment? What is the MAC address assigned to the Network Board?English Idrmd built in KJ5AL b