Control the Projector
PC Adjustment
This function is to adjust the signal from the computer connected to the projector to obtain the proper picture image on the screen. Click on the page number linked texts to change the setting pages.
Item | Description |
Current Mode | Displays current mode of the |
| computer. |
Auto PC Adj | Performs automatic adjust- |
| ment. |
Fine Sync | Performs Fine Sync adjust- |
| ment. |
Total Dots | Adjust the number of total dots |
| in the horizontal period. |
Horizontal | Adjusts horizontal picture posi- |
| tion. |
Vertical | Adjusts vertical picture posi- |
| tion. |
Item | Description |
Clamp | Adjusts clamp position of the |
| picture. |
Display Area H | Adjusts the image area horizontally. |
Display Area V | Adjusts the image area vertically. |
Full Screen* | Makes the image full screen |
| display. |
*This function is not available for some projec- tor's model types. In such a case, please refer to the section of the screen adjustment (p.44)
ENGLISH
✐These parameters will appear only when the analog computer input mode is selected.
Network Board
OWNER’S MANUAL
39