Sanyo POA-MD13NET2 owner manual Network configuration Type1, Confirmation of the network menu

For the Projector which provides the Network main menu

Chapter 2 Installation

Network configuration (Type1)

Confirmation of the network menu

When installing this product to the projector, the network on-screen menu items for this product are activated automatically. If not activated, the product may not have been installed correctly. Please check item “Mounting” (☞ p.14).

Configure the network

When you connect the projector to the network, the network number of projector must be the same as the network you intend to connect. You should configure pro- jector’s network first.

This example explains how to set the following configuration.

IP Address	: 192.168.1.201
Subnet Mask	: 255.255.255.0
Default Gateway	: 192.168.1.1
DNS	: 0.0.0.0

The default network configuration is set as follows.

IP Address	: 192.168.0.2
Subnet Mask	: 255.255.255.0
Default Gateway	: 0.0.0.0
DNS	: 0.0.0.0

1 Selection of network menu

Turn on the projector and display the menu on the screen. Select network icon from the main menu and then press SELECT button once. Check that the mode is "On". If not, change mode to "On" using the point buttons (7 8).

Network icon

Select "On" or "Off" with 7,8 button

*The above on-screen display may differ from the actual display depending on the functions of the projector you use.

16