Sanyo POA-MD13NET2 owner manual English

Page 23

Network configuration

Notice about system construction

For installation of multiple projectors into the same network with Network Board.

Do not install multiple projectors with Network Boards that have their default net- work settings to the same network. The use of the Network Boards which have the default IP address set to the same network settings will cause IP addresses to collide and create a malfunction. When you install multiple projectors into the same net- work, configure the network with the following steps.

1.Change the IP address from the default IP address. To change the IP address, use the network setting menu on the projector. Please see chapter “Network Configuration” for further information (☞ p.16-22).

2.Make sure that there is no network equipment set with the same IP address in the network, and then connect to the network.

3.When installing other projectors, follow the above steps to change the IP address and connect to the network.

In case of installing the projector with Network Board into the network constructed with the DHCP/BOOTP server.

This Network Board does not support the DHCP/BOOTP server. The static IP address must be manually configured. To use this product in this network environment, set it up so that the DHCP/BOOTP server does not assign the IP address configured to this product for another device on the network. Please consult your network administra- tor for further information.

Network Board

OWNER’S MANUAL

ENGLISH

23

Image 23

Contents Network Board Installation and Operation of the Network BoardFederal Communication Commission Notice ComplianceContents Use of Serial Port Chapter Controlling the Multi-ProjectorsChapter AppendixBChapter Preparation Mail Alert function p.32 FeaturesWeb Management function p.36 Control port ready for external equipment via network p.62 Automatic On/Off using Timer function p.47Multi-control function p.56 Operating Environment Operating Environment Trademark Expression/AbbreviationUse of this manual Chapter Installation Set up is completed Flow of installationName and function of each part Mounting Installation and Network configurationConnection of LAN cable Selection of network menu Network configuration Type1Configure the network Confirmation of the network menuRestart the Network board How to enter the numbersCompleting of installation Fixing the Network PIN code Network PIN code settingDisplaying Network PIN code menu Entering the Network PIN codeHow to enter the numbers with the screen 10-key pallet Selection of network menu Network Network configuration Type2Network Setting Password setting Display English Installation Chapter Basic Setting and Operation Enter the IP address Login the setting page of the projectorSelect a display mode and login Main setting page in the Graphic Mode display Display of main settingMain setting page in the Text Mode display Language Setting Initial SettingsDate/Time Setting Password SettingName the projector Network ConfigurationConfigure the network Registering Smtp Server*1, Administrator Address Mail SettingCondition selection for sending alert message Registering and deleting E-mail addressesExamples Type and contents of alert mail Chapter Controlling the Projector Power on/off the projector Items Description Check the status of projectorInput Control the projectorPicture PC AdjustmentLoad a Set Save a SetAvailable selection when the Y, Cb/Pb, Cr/Pr input System AdjustmentAvailable selection when the VIDEO/S-VIDEO input Image adjustment values Image AdjustmentLoad a image mode Save a image adjustment valueSound Adjustment Screen AdjustmentFreeze................Sets the image frozen mode Power SettingSwitching two lamps About Lamp Counter resetSets the HD data wireless Check the Timer events How to set the TimerGetting the current time Cancel the timerIng on the projectors function ServiceCheck the Save items Save Actual AdjustmentLoad a control set Projector Control the projectors menuMake a memo Chapter Controlling the Multi-Projectors Internet Intranet Multi-ControlCheck IP address and projector name Register IP address and projector nameStatus Exclude/Add/Delete a projectorControl Load and apply the setting valueControl multi-projectors at the same time Chapter Use of Serial Port Connected to the serial port Serial Port settingSerial Port Setting Example Control ExamplesSerial Port Switching Preparation Use of TelnetFor example, entering pass- word Control the projector with Telnet Command list tableChapter AppendixA Connection examples Web browser setting Technical dataPeer-To-Peer connection Examples of ConnectionTheater Gateway Router installed in the networkProxy setting Web browser settingActive Script/JavaScript enable Windows XP Professional Internet Explorer ActiveScript settingExamples OS/Browsers Proxy setting Netscape Navigator JavaScript Setting Proxy setting Mac OS Internet Explorer ActiveScript settingProxy setting Netscape Navigator JavaScript Setting Proxy setting TCP/IP Product specificationSerial port specification Port SpecificationLAN port specification AppendixB Why doesn’t the setting page appear in my web browser? Installation/AccessHow can I restrict access from the computer What should I do when I forget the password? Password/LoginOperation Can I control the projector by using the telnet application? Why am I not receiving E-mail alert messages?Can I update the firmware of the Network Board What are the rules for IP address assignment? What is the MAC address assigned to the Network Board?English Idrmd built in KJ5AL b