Sanyo POA-MD13NET2 owner manual Control, Load and apply the setting value

Control

Control

Display the control page by clicking on the Control linked text on the multi-con- trol page. The setting pages are con- structed from 1 to 6 page and each items are indicated on the next page.

Load and apply the setting value

The control sets saved for each projector (☞ p.50) can be used while the multi-con- trolled projectors function is being used. Select a setting number from the item Load Setting No. with the pull-down menu button and then press the Set button. The con- trol values stored with selected set number for each projector will be applied to the individual projector assigned to that set. The same control values will not be applied to all of the projectors under the multi-control.

✐If loading a set to the multiple projectors, the contents of the set must be effective to current accessed projector. If not, the multi-control cannot be performed.

Example: If the DVI computer input for SLOT1 is set into the “Set1” and the current accessed projector has a video board on the SLOT1, the load set will become invalid this time and the loading of set for the another projectors will not be carried out.

Network Board

OWNER’S MANUAL

ENGLISH

59