Sanyo POA-MD13NET2 owner manual Image Adjustment, Image adjustment values

Page 42

Chapter 4 Controlling the Projector

Image Adjustment

This function is to adjust the projected picture image and set the image mode. For selection of image mode, select a desired image mode with the Image Adjustment Mode pull-down menu button and then press the Set

button. The setting items are switched automatically according to selected input mode, computer or video input.

Item Description

Image Adjustment*. Selects image mode among the Standard, Real, Cinema, Dynamic, Image1 to Image4 with pull-down button menu . Image1 to 4 are user preset mode.

Original Mode ........Displays which predefined

image adjustment mode is based upon.

Adjustment

items ..................Contrast, Brightness, Color, Tint

BrilliantColor............Improve the color performance

with BrilliantColorTM technology.

* Available image mode may differ from the actual depending on the projector's model type.

Type1: Image1 to Image4

Type2: Image1 to Image10

Item	Description
White Balance
Color Temp	Sets a color temperature mode.
Red, green,
Blue	Adjusts a white balance
	respectively.

Item	Description
Sharpness	Adjusts picture sharpness.
Gamma	Adjusts brightness of darker
	part of the picture.
Noise
Reduction	Switches noise reduction
	on/off.
Progressive	Switches progressive mode.
Save Adjustment ....	Select a mode to store the
	image adjustment values.

* The displayed adjustment items may differ from the actual depending on the functions of projector you use. The error message may appear if the projector does not support the function.

42

Image 42

Contents Installation and Operation of the Network Board Network BoardCompliance Federal Communication Commission NoticeContents AppendixB Chapter Controlling the Multi-ProjectorsChapter Use of Serial PortChapter Preparation Features Web Management function p.36Mail Alert function p.32 Automatic On/Off using Timer function p.47 Multi-control function p.56Control port ready for external equipment via network p.62 Operating Environment Operating Environment Expression/Abbreviation Use of this manualTrademark Chapter Installation Flow of installation Set up is completedName and function of each part Installation and Network configuration MountingConnection of LAN cable Confirmation of the network menu Network configuration Type1Configure the network Selection of network menuHow to enter the numbers Completing of installationRestart the Network board Entering the Network PIN code Network PIN code settingDisplaying Network PIN code menu Fixing the Network PIN codeHow to enter the numbers with the screen 10-key pallet Network configuration Type2 Selection of network menu NetworkNetwork Setting Password setting Display English Installation Chapter Basic Setting and Operation Login the setting page of the projector Select a display mode and loginEnter the IP address Display of main setting Main setting page in the Graphic Mode displayMain setting page in the Text Mode display Initial Settings Language SettingPassword Setting Date/Time SettingNetwork Configuration Configure the networkName the projector Mail Setting Registering Smtp Server*1, Administrator AddressRegistering and deleting E-mail addresses Condition selection for sending alert messageExamples Type and contents of alert mail Chapter Controlling the Projector Power on/off the projector Check the status of projector Items DescriptionControl the projector Input PC Adjustment PictureSave a Set Load a SetSystem Adjustment Available selection when the VIDEO/S-VIDEO inputAvailable selection when the Y, Cb/Pb, Cr/Pr input Image Adjustment Image adjustment valuesSave a image adjustment value Load a image modeScreen Adjustment Sound AdjustmentSetting Freeze................Sets the image frozen mode PowerAbout Lamp Counter reset Switching two lampsSets the HD data wireless How to set the Timer Check the Timer eventsCancel the timer Getting the current timeService Ing on the projectors functionSave Actual Adjustment Check the Save itemsLoad a control set Control the projectors menu ProjectorMake a memo Chapter Controlling the Multi-Projectors Multi-Control Internet IntranetRegister IP address and projector name Check IP address and projector nameExclude/Add/Delete a projector StatusLoad and apply the setting value ControlControl multi-projectors at the same time Chapter Use of Serial Port Serial Port setting Connected to the serial portSerial Port Setting Control Examples ExampleSerial Port Switching Use of Telnet PreparationFor example, entering pass- word Command list table Control the projector with TelnetConnection examples Web browser setting Technical data Chapter AppendixAExamples of Connection Peer-To-Peer connectionGateway Router installed in the network TheaterWeb browser setting Active Script/JavaScript enableProxy setting Internet Explorer ActiveScript setting Examples OS/BrowsersWindows XP Professional Proxy setting Netscape Navigator JavaScript Setting Proxy setting Internet Explorer ActiveScript setting Mac OSProxy setting Netscape Navigator JavaScript Setting Proxy setting Product specification TCP/IPPort Specification LAN port specificationSerial port specification AppendixB Installation/Access Why doesn’t the setting page appear in my web browser?How can I restrict access from the computer Password/Login What should I do when I forget the password?Operation Why am I not receiving E-mail alert messages? Can I control the projector by using the telnet application?Can I update the firmware of the Network Board What is the MAC address assigned to the Network Board? What are the rules for IP address assignment?English Idrmd built in KJ5AL b