Sanyo POA-MD13NET2 owner manual Network configuration Type2, Selection of network menu Network

Page 20

For the Projector which provides the Network sub menu in the Setting main menu

Chapter 2 Installation

Network configuration (Type2)

Confirmation of the network menu

When installing this product to the projector, the network on-screen menu items for this product are activated automatically. If not activated, the product may not have been installed correctly. Please check item “Mounting” (☞ p.14).

Configure the network

When you connect the projector to the network, the network number of projector must be the same as the network you intend to connect. You should configure pro- jector’s network first.

This example explains how to set the following configuration.

IP Address	: 192.168.1.201
Subnet Mask	: 255.255.255.0
Default Gateway	: 192.168.1.1
DNS	: 0.0.0.0

The default network configuration is set as follows.

IP Address	: 192.168.0.2
Subnet Mask	: 255.255.255.0
Default Gateway	: 0.0.0.0
DNS	: 0.0.0.0

1 Selection of network menu [Network]

Turn on the projector and display the menu on the screen. Select the Network icon from the Setting sub menu using the point buttons (d e 7 8) and then press the SELECT button on the remote control or on the projector. Confirm that its mode is set "On". If not, change mode to "On" using the point buttons 7 8.

*The above on-screen display may differ from the actual display depending on the functions of the projector you use.

20

Image 20

Contents Installation and Operation of the Network Board Network BoardCompliance Federal Communication Commission NoticeContents Chapter Controlling the Multi-Projectors ChapterAppendixB Use of Serial PortChapter Preparation Mail Alert function p.32 FeaturesWeb Management function p.36 Control port ready for external equipment via network p.62 Automatic On/Off using Timer function p.47Multi-control function p.56 Operating Environment Operating Environment Trademark Expression/AbbreviationUse of this manual Chapter Installation Flow of installation Set up is completedName and function of each part Installation and Network configuration MountingConnection of LAN cable Network configuration Type1 Configure the networkConfirmation of the network menu Selection of network menuRestart the Network board How to enter the numbersCompleting of installation Network PIN code setting Displaying Network PIN code menuEntering the Network PIN code Fixing the Network PIN codeHow to enter the numbers with the screen 10-key pallet Network configuration Type2 Selection of network menu NetworkNetwork Setting Password setting Display English Installation Chapter Basic Setting and Operation Enter the IP address Login the setting page of the projectorSelect a display mode and login Display of main setting Main setting page in the Graphic Mode displayMain setting page in the Text Mode display Initial Settings Language SettingPassword Setting Date/Time SettingName the projector Network ConfigurationConfigure the network Mail Setting Registering Smtp Server*1, Administrator AddressRegistering and deleting E-mail addresses Condition selection for sending alert messageExamples Type and contents of alert mail Chapter Controlling the Projector Power on/off the projector Check the status of projector Items DescriptionControl the projector InputPC Adjustment PictureSave a Set Load a SetAvailable selection when the Y, Cb/Pb, Cr/Pr input System AdjustmentAvailable selection when the VIDEO/S-VIDEO input Image Adjustment Image adjustment valuesSave a image adjustment value Load a image modeScreen Adjustment Sound AdjustmentSetting Freeze................Sets the image frozen mode PowerAbout Lamp Counter reset Switching two lampsSets the HD data wireless How to set the Timer Check the Timer eventsCancel the timer Getting the current timeService Ing on the projectors functionSave Actual Adjustment Check the Save itemsLoad a control set Control the projectors menu ProjectorMake a memo Chapter Controlling the Multi-Projectors Multi-Control Internet IntranetRegister IP address and projector name Check IP address and projector nameExclude/Add/Delete a projector StatusLoad and apply the setting value ControlControl multi-projectors at the same time Chapter Use of Serial Port Serial Port setting Connected to the serial portSerial Port Setting Control Examples ExampleSerial Port Switching Use of Telnet PreparationFor example, entering pass- word Command list table Control the projector with TelnetConnection examples Web browser setting Technical data Chapter AppendixAExamples of Connection Peer-To-Peer connectionGateway Router installed in the network TheaterProxy setting Web browser settingActive Script/JavaScript enable Windows XP Professional Internet Explorer ActiveScript settingExamples OS/Browsers Proxy setting Netscape Navigator JavaScript Setting Proxy setting Internet Explorer ActiveScript setting Mac OSProxy setting Netscape Navigator JavaScript Setting Proxy setting Product specification TCP/IPSerial port specification Port SpecificationLAN port specification AppendixB Installation/Access Why doesn’t the setting page appear in my web browser?How can I restrict access from the computer Password/Login What should I do when I forget the password?Operation Why am I not receiving E-mail alert messages? Can I control the projector by using the telnet application?Can I update the firmware of the Network Board What is the MAC address assigned to the Network Board? What are the rules for IP address assignment?English Idrmd built in KJ5AL b