Control the Projector
Getting the current time
The displayed time is the value set when the setting page was displayed. This time value is not updated automatically. To update the display time press the Refresh but- ton.
Notes on timer setting
✐Up to 10 timer events can be registered. Timer events always operate according to the next valid event depending on the projector's power status. In the example below, event 3 turns on the projector so next event 4 (also turning on projector) will not be effective because the projector is already turned on. Similarly, when the projector is turned off by event 5, event 6 OFF will not be effective in turning it off again. But these secondary events (event 4 and event 6) will become effective if a person turns off the projector (after event 3 and before event 4) or turns on the projector (after event 5 and before event 6).
|
| Invalid event | Invalid event |
Projector Power | ON | ON |
|
Event 1 | ON |
|
|
Event 2 |
| OFF |
|
Event 3 |
| ON |
|
Event 4 |
| ON |
|
Event 5 |
|
| OFF |
Event 6 |
|
| OFF |
Time |
|
|
|
✐When the timer events are set at the same time, the last event set will override the previous events. For example, if there is an event like “On at 8:00 everyday” and then new event is set like “Off at 8:00 everyday”, only the last setting event is effective.
✐When the timer event ON occurs during cooling down period, this is invalid event because the projector cannot be turned on during this cooling down period.
Cancel the timer
To cancel the timer event, check the |
|
|
| ||
timer event you want to delete and then |
|
|
| ENGLISH | |
|
|
| |||
press the Delete button. |
|
|
| ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
✐The timer operates by using the clock function provided in this product. Before setting the timer, please confirm that the current date and time are set correctly. Timer and clock func- tions are functioning using a lithium battery provided in this product. When the battery runs down, the clock and timer functions will not operate correctly. Consult your local dealer for the replacement of battery. The replacement must be carried out by a qualified service per- sonnel.
Network Board
OWNER’S MANUAL
49