Q&A
Operation
QWhy can't I change the controls in the setting page with web browser?
APlease make sure the projector is turned on. If it is in the standby mode, the setting is not effective to the projector. To control the projector with a web
browser, the projector must be in the
Qplay?Why does it sometimes take a lot of time to complete the page dis-
AThe display speed of the page depends on the network environment in which both the projector and computer are placed. It may take much time to complete
the page display if network traffic is heavy. Please consult your network admin- istrator. By changing the preference of your web browser to “not show pic- tures”, you may have page display more quickly at the heavy network traffic. Please see the browser’s
QI use many of the projectors in the network. How can I use names of the projectors to recognize each projector instead of IP addresses?
AYou can manage the projectors with nicknames instead of the IP address. Please see chapter “Controlling the
p.55).
By registering the projector name and IP address with the DNS server, it can be accessed with the nickname from the any computer referred to the DNS serv- er. Please consult your network administrator (☞ p.31, 57).
QHow many numbers of the
AYou can register up to 10 addresses.
ENGLISH
Network Board
OWNER’S MANUAL
87