Sanyo POA-MD13NET2 owner manual Service, Ing on the projectors function

Chapter 4 Controlling the Projector

Service

This function sets parameters for service items of the projector. As these service items are used mainly for maintenance, please use the default set- ting unless a change is needed. There may be not available items depend-

ing on the projector's function.

Item	Description
Fan Control
Speed	Sets fan control speed.
Prohibition	Sets the prohibition of the pro-
	jector control by the remote
	control or the keys on the pro-
	jector.

Item	Description
Video System*1	..Displays the current video sys-
	tem mode.
H Area*1	Adjusts the horizontal effective
	area.
V Area*1	Adjusts the vertical effective area.
H Position*1	Moves image horizontally
V Position*1	Moves image vertically.

*1 It cannot be displayed in the computer mode. * To restore the setting, press the Default button. * Some projector's model types cannot support

this function.

- The indication of video system in this page is displayed as follows.

Video System	Input Signal
480I	NTSC [VIDEO], [S-VIDEO], [Y, Cb/Pb, Cr/Pr]
480P	NTSC [Y, Cb/Pb, Cr/Pr]
575I	PAL [VIDEO], [S-VIDEO], [Y, Cb/Pb, Cr/Pr]
575P	PAL [Y, Cb/Pb, Cr/Pr]
720P60	[Y, Pb, Pr]
720P50	[Y, Pb, Pr]
1035I	[Y, Pb, Pr]
1080I60	[Y, Pb, Pr]
1080I50	[Y, Pb, Pr]
1080P60	[Y, Pb, Pr]
1080P50	[Y, Pb, Pr]

✐The adjustments of H/V Area and Position are effective only for video input mode. These adjustment values are stored with each video system mode as the above.

50