Kyocera KM-2540 manual Split Mode, Two-sided to One-sided, Book to One-sided

1

Original

1 2

Copy

Split Mode

Use Split mode to create single-sided copies from two-sided originals or originals with facing pages (such as books or magazines) as follows.

Two-sided to One-sided

Copies each side of a two-sided original onto two individual sheets.

Note This operation requires the optional document processor.

The following binding options are available.

•Binding Left/Right: The back side and front side of the original are copied with the same orientation.

•Binding Top: The back side is copied rotated 180 ° from the orientation of the front side.

1 2 1 2

Original Copy

Ready to copy.					P
11×8½"
Plain
11×17"	APS	Auto %		Off
Color
11×8½"	MP Tray	100%	Auto	Stap
Plain	Plain		Density	Left
8½×11"
Plain		Zoom	Density	Stap
Basic	User choice	Function	Program
Ready to copy.
Paper	Duplex	Original	Combine
Selection		Size
Density	Zoom	Mixed Size	Continuous
		Originals	Scan
Original	Margin/	Page #
Image	Centering
Collate/	Border	Cover	Booklet
Offset	Erase
Basic	User choice	Function	Program

Book to One-sided

Copies each page of originals with facing pages (such as books or magazines) onto two individual sheets.

The following binding options are available.

•Binding Left: Originals with facing pages are copied from left to right.

•Binding Right: Originals with facing pages are copied from right to left.

Note Original sizes for split mode copy mode are limited to

11 × 17", 8 1/2 × 11", A3, B4, A4R, B5R and 8K. Paper sizes are limited to 11 × 8 1/2", A4, B5 and 16K. Change the paper size to fit the original to that size.

Follow the steps as below to use Split mode.

1Press [Function].

2Press [Duplex].

Basic Operation 3-13