Lexmark C77x manual Part

Page 106

Notices

Part 68

This equipment complies with Part 68 of the FCC rules and the requirements adopted by the Administrative Council for Terminal Attachments (ACTA). On the back of this equipment is a label that contains, among other information, a product identifier in the format US:AAAEQ##TXXXX. If requested, this number must be provided to your telephone company.

This equipment uses the RJ-11C Universal Service Order Code (USOC) jack.

A plug and jack used to connect this equipment to the premises’ wiring and telephone network must comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant telephone cord and modular plug is provided with this product. It is designed to be connected to a compatible modular jack that is also compliant. See your setup documentation for more information.

The Ringer Equivalence Number (REN) is used to determine the number of devices that may be connected to a telephone line. Excessive RENs on a telephone line may result in the devices not ringing in response to an incoming call. In most but not all areas, the sum of RENs should not exceed five (5.0). To be certain of the number of devices that may be connected to a line, as determined by the total RENs, contact your local telephone company. For products approved after July 23, 2001, the REN for this product is part of the product identifier that has the format US:AAAEQ##TXXXX. The digits represented by ## are the REN without a decimal point (for example, 03 is a REN of 0.3). For earlier products, the REN is shown separately on the label.

If this equipment causes harm to the telephone network, the telephone company will notify you in advance that temporary discontinuance of service may be required. If advance notice is not practical, the telephone company will notify the customer as soon as possible. You will also be advised of your right to file a complaint with the FCC.

The telephone company may make changes in its facilities, equipment, operations or procedures that could affect the operation of this equipment. If this happens, the telephone company will provide advance notice in order for you to make necessary modifications to maintain uninterrupted service.

If you experience trouble with this equipment, for repair or warranty information, contact Lexmark International, Inc. at www.lexmark.com or your Lexmark representative. If the equipment is causing harm to the telephone network, the telephone company may request that you disconnect the equipment until the problem is resolved.

This equipment contains no user serviceable parts. For repair and warranty information, contact Lexmark International, Inc. See the previous paragraph for contact information.

Connection to party line service is subject to state tariffs. Contact the state public utility commission, public service commission, or corporation commission for information.

If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of this equipment does not disable your alarm equipment. If you have questions about what will disable alarm equipment, consult your telephone company or a qualified installer.

Telephone companies report that electrical surges, typically lightning transients, are very destructive to customer terminal equipment connected to AC power sources. This has been identified as a major nationwide problem. It is recommended that the customer install an appropriate AC surge arrestor in the AC outlet to which this device is connected. An appropriate AC surge arrestor is defined as one that is suitably rated, and certified by UL (Underwriter's Laboratories), another NRTL (Nationally Recognized Testing Laboratory), or a recognized safety certification body in the country/region of use. This is to avoid damage to the equipment caused by local lightning strikes and other electrical surges.

The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computer or other electronic device, including fax machines, to send any message unless said message clearly contains in a margin at the top or bottom of each transmitted page or on the first page of the transmission, the date and time it is sent and an identification of the business or other entity, or other individual sending the message, and the telephone number of the sending machine or such business, other entity, or individual. (The telephone number provided may not be a 900 number or any other number for which charges exceed local or long-distance transmission charges.)

See your user documentation in order to program this information into your fax machine.

Notices

106

Page 105 Page 107
Image 106
Page 105 Page 107
Contents MFP Option United States Government Rights Static sensitivity notice Contents Contents Understanding paper and specialty media guidelines Index 111 Automatic document feeder and flatbed Learning about the MFPBasic functions of the scanner Understanding the MFP control panelCallout Control panel item Function Learning about the MFPStatus Indicates With fax functions Fax Mail Home screen and Home screen buttonsCopy Callout number Button FunctionFTP Button Button name FunctionJobs CancelArrow buttons, see Information on touch-screen buttons Sample screen one Information on touch-screen buttons Using the LCD touch-screen buttonsButton Button name Function or description Scan Submit Flatbed ScanSubmit BackSample screen two Down arrowOther touch-screen buttons See Cancel Jobs onCancel Job ContinueDone Screen buttons on page 11 for more informationFeatures Feature Feature name DescriptionHelp Paper Menu Reports Network/Ports SettingsMenus Manage ShortcutsQuick copy CopyingMultiple page copying Understanding the copy screens and options Using the flatbedCopying Understanding the copy screens and options Copying to letterhead Copying from one size to anotherMaking transparencies Copying photographsTouch Photograph Making copies using media from a selected trayCopying mixed-sized media Touch Scan Next or DoneAdjusting copy quality Setting the duplex optionReducing and enlarging copies Placing separator sheets between copies Setting collation optionsSetting paper saving options Touch Separator SheetsCreating a custom job job build Placing the date and time at the top of eachPlacing an overlay message on each Touch Date/Time StampCopy tips Canceling a copy jobWhile copying pages using the flatbed While the document is in the ADFEntering an e-mail address Using a shortcut numberMail Touch E-mail ItAdding e-mail subject and message information Using the address bookMailing to a profile MailMailing color documents Click E-mail Destination SetupChanging the output file type Creating an e-mail shortcutUnderstanding e-mail options Canceling an e-mailCreating an e-mail profile From the MFPUnderstanding e-mail options Mail server setup Address book setupFaxing Sending a faxSending faxes from a computer Using fax destination shortcutsFaxing Click Fax Shortcut Setup Creating shortcutsUnderstanding fax options Touch Advanced Options Touch Delayed Send Changing the fax resolutionAdjusting the Darkness setting Sending a fax at a later timeViewing a fax log Cancel an outgoing faxFax tips FTP Entering the FTP addressClick FTP Shortcut Setup FTP optionsFTP options FTP tips Create a scan to PC profile Scanning to a PC or USB flash memory deviceClick Scan Profile Click Create Scan Profile Understanding scan to PC options Scanning to a PC or USB flash memory deviceScanning tips Solving scan quality problemsScanning to a USB flash memory device Touch Scan to USB drivePrinting Printing from a USB flash memory deviceCanceling a print job PrintingCanceling a job from a computer running Windows Canceling a job from the MFP control panelCanceling a job from a Macintosh computer Printing a font sample list Printing the menu settingsPrinting a network setup Printing a directory listPrinting confidential and held jobs Printing a confidential jobPrinting and deleting held jobs Entering a personal identification number PINPrinting Printing on specialty media Loading standard trays and optional trays Loading 500-sheet traysPrinting Loading the 2000-sheet tray Printing Loading the multipurpose feeder Linking trays Understanding paper and specialty media 8 guidelines Print media sizes Print media types Print media weightsSupported print media Dimensions Understanding paper and specialty media guidelinesPaper Optional Finisher Standard Offset StapleGlossy papers Grain short2,3 MaximumGrain long2,3 Transparencies2Selecting print media Paper characteristicsPaper Unacceptable paper Fiber contentTransparencies Grain directionEnvelopes Labels Card stockAvoiding jams Storing print mediaAutomatic document feeder Printer Installing and removing options Accessing the printer system boardInstalling a memory card Installing and removing optionsInstalling a firmware card Installing the interface card Replacing the access cover plate Maintaining the MFP Storing suppliesPage Recycling Lexmark products Cleaning the scanner glass and backing materialMaintaining the MFP Cleaning the automatic document feeder Scanner registration Touch Exit Configuration MenuTouch Automatic Scanner Registration Removing the scanner top Moving the MFP within the office Moving the MFPPreparing the MFP for shipment Identifying jams Clearing jamsCopy Fax Mail Printer access doors and trays Clearing jamsUnderstanding printer jam messages Message Check Areas What to doClearing scanner jams 290, 291, 292, and 294 Scanner JamsRestoring factory default settings Administrative supportAdjusting control panel brightness Touch Settings Touch General SettingsAdjusting Power Saver Adjusting screen timeoutAdministrative support Setting Password Protect for the menus Configuring the MFPRestricting Function Access Unlocking the MFP using the Device Lockout PIN Preventing access to the menus from the control panelLocking the MFP using the Device Lockout PIN Disabling the Driver to Fax menu itemSetting the Advanced Password Setting a password before printing received faxesSetting security using the Embedded Web Server EWS Select Always On for Held Fax ModeUsing the secure EWS Disabling SNMPv1 and SNMPv2Supporting IPSec Internet Protocol Security Click TCP/IP Port AccessDisabling ports and protocols Click 802.1x Authentication Using 802.1x authenticationConfidential Print Setup Click Confidential Print SetupTouch Exit Config Menu to exit Encrypting the hard diskUsing the Restricted Server List function Hard disk wipingOnline technical support Checking an unresponsive MFP TroubleshootingUnderstanding MFP messages Locating the port name and IP addressTroubleshooting Solving copy quality problemsSolving scan quality problems Symptom SolutionSymptom Cause Solution Solving fax problemsSolving paper feed problems See Ordering an ADF pick roller for more informationIndustry Canada compliance statement Conventions Electronic emission noticesPart Avis de conformité aux normes de l’industrie du CanadaEuropean Community EC directives conformity 103Radio interference notice MaltiR31306 Bsmi EMC noticePart Other telecommunications notices South Africa telecommunications noticeNoise emission levels Using this product in GermanyUsing this product in Switzerland Mailing addressPower regulation notice Meter average sound pressure, dBAChina RoHS Part Name Hazardous Substances or ElementsIndex Index 113 114
Top Page Image Contents