Lexmark C77x manual Labels, Card stock

Page 70

Understanding paper and specialty media guidelines

Labels

The MFP can print on many labels designed for use with laser printers. These labels are supplied in letter size, A4 size, and legal size sheets. Label adhesives, face sheet (printable stock), and topcoats must be able to withstand temperatures of 230°C (446°F) and pressure of 25 pounds per square inch (psi).

Try a sample of any labels you are considering using with the MFP before purchasing a large quantity.

For detailed information on label printing, characteristics, and design, see the Card Stock & Label Guide available on the Lexmark Web site at www.lexmark.com/publications.

When printing on labels:

•Set the Paper Size/Type menu item to Labels in the Paper menu. You can set the Paper Size/Type from the MFP control panel, the MFP driver, or from MarkVision Professional.

•Do not load labels with paper or transparencies in the same source; mixing print media can cause feeding problems and print-quality problems.

•Do not use label sheets with a slick backing material.

•Use full label sheets. Partial sheets may cause labels to peel off during printing, resulting in a jam. Partial sheets also contaminate the MFP and your cartridge with adhesive, and could void the MFP and cartridge warranties.

•Use labels that can withstand temperatures of 230°C (446°F) without sealing, excessive curling, wrinkling, or releasing hazardous emissions.

•Do not print within 1 mm (0.04 in.) of the edge of the label, of the perforations, or between die-cuts of the label.

•Do not use label sheets that have adhesive to the edge of the sheet. We recommend zone coating of the adhesive at least 1 mm (0.04 in.) away from edges. Adhesive material contaminates the MFP and could void the warranty.

•If zone coating of the adhesive is not possible, a 1.6 mm (0.1 in.) strip should be removed on the leading and driver edge, and a non-oozing adhesive should be used.

•Remove a 1.6 mm (0.1 in.) strip from the leading edge to prevent labels from peeling inside the MFP.

•Portrait orientation is preferred, especially when printing bar codes.

•Do not use labels that have exposed adhesive.

Card stock

Card stock is single ply, and has a large array of properties, such as the moisture content, thickness, and texture, that can significantly affect print quality. See Supported print media for information on the preferred weight and for the grain direction of print media.

Try a sample of any card stock you are considering using with the MFP before purchasing a large quantity.

When printing on card stock:

•Set the Paper Type menu item in the Paper menu to Card Stock from the control panel, from the MFP driver, or from MarkVision Professional.

•Be aware that preprinting, perforation, and creasing can significantly affect the print quality and cause print media handling or jamming problems.

•Avoid using card stock that may release hazardous emissions when heated.

•Do not use preprinted card stock manufactured with chemicals that may contaminate the MFP. Preprinting introduces semi-liquid and volatile components into the MFP.

•We recommend the use of grain short card stock.

Selecting print media

70

Page 69 Page 71
Image 70
Page 69 Page 71
Contents MFP Option United States Government Rights Static sensitivity notice Contents Contents Understanding paper and specialty media guidelines Index 111 Automatic document feeder and flatbed Learning about the MFPBasic functions of the scanner Understanding the MFP control panelCallout Control panel item Function Learning about the MFPStatus Indicates With fax functions Fax Mail Home screen and Home screen buttonsCopy Callout number Button FunctionFTP Button Button name FunctionJobs CancelArrow buttons, see Information on touch-screen buttons Sample screen one Information on touch-screen buttons Using the LCD touch-screen buttonsButton Button name Function or description Scan Submit Flatbed ScanSubmit BackSample screen two Down arrowOther touch-screen buttons See Cancel Jobs onCancel Job ContinueDone Screen buttons on page 11 for more informationFeatures Feature Feature name DescriptionHelp Paper Menu Reports Network/Ports SettingsMenus Manage ShortcutsQuick copy CopyingMultiple page copying Understanding the copy screens and options Using the flatbedCopying Understanding the copy screens and options Copying to letterhead Copying from one size to anotherMaking transparencies Copying photographsTouch Photograph Making copies using media from a selected trayCopying mixed-sized media Touch Scan Next or DoneAdjusting copy quality Setting the duplex optionReducing and enlarging copies Placing separator sheets between copies Setting collation optionsSetting paper saving options Touch Separator SheetsCreating a custom job job build Placing the date and time at the top of eachPlacing an overlay message on each Touch Date/Time StampCopy tips Canceling a copy jobWhile copying pages using the flatbed While the document is in the ADFEntering an e-mail address Using a shortcut numberMail Touch E-mail ItAdding e-mail subject and message information Using the address bookMailing to a profile MailMailing color documents Click E-mail Destination SetupChanging the output file type Creating an e-mail shortcutUnderstanding e-mail options Canceling an e-mailCreating an e-mail profile From the MFPUnderstanding e-mail options Mail server setup Address book setupFaxing Sending a faxSending faxes from a computer Using fax destination shortcutsFaxing Click Fax Shortcut Setup Creating shortcutsUnderstanding fax options Touch Advanced Options Touch Delayed Send Changing the fax resolutionAdjusting the Darkness setting Sending a fax at a later timeViewing a fax log Cancel an outgoing faxFax tips FTP Entering the FTP addressClick FTP Shortcut Setup FTP optionsFTP options FTP tips Create a scan to PC profile Scanning to a PC or USB flash memory deviceClick Scan Profile Click Create Scan Profile Understanding scan to PC options Scanning to a PC or USB flash memory deviceScanning tips Solving scan quality problemsScanning to a USB flash memory device Touch Scan to USB drivePrinting Printing from a USB flash memory deviceCanceling a print job PrintingCanceling a job from a computer running Windows Canceling a job from the MFP control panelCanceling a job from a Macintosh computer Printing a font sample list Printing the menu settingsPrinting a network setup Printing a directory listPrinting confidential and held jobs Printing a confidential jobPrinting and deleting held jobs Entering a personal identification number PINPrinting Printing on specialty media Loading standard trays and optional trays Loading 500-sheet traysPrinting Loading the 2000-sheet tray Printing Loading the multipurpose feeder Linking trays Understanding paper and specialty media 8 guidelines Print media sizes Print media types Print media weightsSupported print media Dimensions Understanding paper and specialty media guidelinesPaper Optional Finisher Standard Offset StapleGlossy papers Grain short2,3 MaximumGrain long2,3 Transparencies2 Selecting print media Paper characteristics Paper Unacceptable paper Fiber contentTransparencies Grain directionEnvelopes Labels Card stockAvoiding jams Storing print mediaAutomatic document feeder Printer Installing and removing options Accessing the printer system boardInstalling a memory card Installing and removing optionsInstalling a firmware card Installing the interface card Replacing the access cover plate Maintaining the MFP Storing suppliesPage Recycling Lexmark products Cleaning the scanner glass and backing materialMaintaining the MFP Cleaning the automatic document feeder Scanner registration Touch Exit Configuration MenuTouch Automatic Scanner Registration Removing the scanner top Moving the MFP within the office Moving the MFPPreparing the MFP for shipment Identifying jams Clearing jamsCopy Fax Mail Printer access doors and trays Clearing jamsUnderstanding printer jam messages Message Check Areas What to doClearing scanner jams 290, 291, 292, and 294 Scanner JamsRestoring factory default settings Administrative supportAdjusting control panel brightness Touch Settings Touch General SettingsAdjusting Power Saver Adjusting screen timeoutAdministrative support Setting Password Protect for the menus Configuring the MFPRestricting Function Access Unlocking the MFP using the Device Lockout PIN Preventing access to the menus from the control panelLocking the MFP using the Device Lockout PIN Disabling the Driver to Fax menu itemSetting the Advanced Password Setting a password before printing received faxesSetting security using the Embedded Web Server EWS Select Always On for Held Fax ModeUsing the secure EWS Disabling SNMPv1 and SNMPv2Supporting IPSec Internet Protocol Security Click TCP/IP Port AccessDisabling ports and protocols Click 802.1x Authentication Using 802.1x authenticationConfidential Print Setup Click Confidential Print SetupTouch Exit Config Menu to exit Encrypting the hard diskUsing the Restricted Server List function Hard disk wipingOnline technical support Checking an unresponsive MFP TroubleshootingUnderstanding MFP messages Locating the port name and IP addressTroubleshooting Solving copy quality problemsSolving scan quality problems Symptom SolutionSymptom Cause Solution Solving fax problemsSolving paper feed problems See Ordering an ADF pick roller for more informationIndustry Canada compliance statement Conventions Electronic emission noticesPart Avis de conformité aux normes de l’industrie du CanadaEuropean Community EC directives conformity 103Radio interference notice MaltiR31306 Bsmi EMC noticePart Other telecommunications notices South Africa telecommunications noticeNoise emission levels Using this product in GermanyUsing this product in Switzerland Mailing addressPower regulation notice Meter average sound pressure, dBAChina RoHS Part Name Hazardous Substances or ElementsIndex Index 113 114
Top Page Image Contents