5To change the length of time between redials:
aPress the up or down arrow button until Redial Time is highlighted, and then press OK.
bPress the up or down arrow button until the setting you want is highlighted, and then press OK.
SCHEDULE TO RESEND FAX AT A LATER TIME
See the instructions on sending a broadcast fax at a scheduled time.
Phone Line Error
These are possible causes and solutions. Try one or more of the following:
REVIEW DIGITAL PHONE SERVICE CHECKLIST
The fax modem is an analog device. Certain devices can be connected to the printer so that digital telephone services can be used.
•If you are using an ISDN telephone service, connect the printer to an analog telephone port (an
•If you are using DSL, connect to a DSL filter or router that will support analog use. For more information, contact your DSL provider.
•If you are using a PBX telephone service, make sure you are connecting to an analog connection on the PBX. If none exists, consider installing an analog telephone line for the fax machine. For more information on faxing when using a PBX telephone service, see the instructions for setting up to fax while behind a PBX.
CHECK PHONE LINE
If the telephone line is being used by another device, wait until the other device is finished before sending the fax.
CHECK CABLE CONNECTIONS
Make sure cable connections for the following hardware are secure, if applicable:
•Power supply
•Telephone
•Handset
•Answering machine
Troubleshooting
53