Cooper Bussmann BU-945U-E 802.11 DSSS user manual 3A1582Rev1.6

Page 27

Cooper Bussmann Wireless Ethernet & Device Server BU-945U-E 802.11 DSSS User Manual

For optimal security a passphrase consisting of a combination of letters and numbers (i.e., not just a simple word or phrase) as well as upper and lower case. E.g., “WiReLeSs TeChNoLoGy 2010”

WPA Enterprise - Supplicant Configuration

Username / Password: User credentials that match a valid user on the RADIUS server.

Enable Debug: Must only be used during commissioning and only if requested by Cooper Bussmann Support. This must be disabled for normal operation.

Trusted CA Certificate Upload: Upload the certificate of the issuer of the RADIUS server’s certificate. This enables the Supplicant to verify the identity of the RADIUS server during the authentication process.

Certificate Verification result: Once a certificate has been loaded, this text box will contain validation information for the certificate. If this text is blank or contains errors, the certificate is invalid.

Trusted CA Certificate Contents: Displays the contents of the loaded certificate.

WPA Enterprise - Authenticator Configuration

RADIUS Server IP Address/Port/shared secret: Connection information for the RADIUS Authentication Server.

Supplicant Re-authenticate Period: Sets the maximum time at which the Supplicant must re-authenticate. This parameter determines maximum time a client will still have access to the network after its user credentials have been revoked.

Enable Debug: Must only be used during commissioning and only if requested by Cooper Bussmann Support. This must be disabled for normal operation.

3A1582Rev1.6

www.cooperbussmann.com/BussmannWirelessResources

27

Image 27

Contents Read Retain Cooper Bussmann Application Engineering FCC NoticePhone 800 a.m 500 p.m. Central, M-F 636 Fax 636 Important Notice GNU Free Documentation LicenseCooper Bussmann Contents BU-945U-E 802.11 630mW max power Access Point vs ClientNetwork Topology 3A1582Rev1.6 Bridge vs. Router Getting Started Quickly General Antenna InstallationAntennas Bench test and Demo System SetupPlant and Factory Installations Line-of-sight installationsOmni-directional Antennas Installation tipsRS232 Serial Port Power SupplySerial Connections Directional AntennasRS485 Serial Port DB9 Connector Pinouts3A1582Rev1.6 Discrete Digital Input/Output Start-up Selecting a Channel LED Indication802.11 900 MHz Channels 3A1582Rev1.6 Data Throughput Based on Repeater Hops Radio ThroughputConfiguring the Unit for the First Time Default ConfigurationAccessing Configuration for the First Time For local addresses Power up the BU-945U-E moduleEnter the username user and default password user Method 1 Set PC to same network as BU-945U-E3A1582Rev1.6 Quick Start Quick Start ConfigurationNetwork Configuration Save Changes and Reset Dhcp Server Configuration, Default is uncheckedWireless ports will have the same IP address Configured Essid of the clientEncryption keys must not be all zeros, i.e Security Menu3A1582Rev1.6 Router Operation Radio ConfigurationNormal Operation Transparent Bridge OperationAccess point Bands Default is AutoSignal quality, etc Drop back to non-bursting modeChannel Selection Dhcp Client ConfigurationRadio Mode BU-945U-E Only Supports the 802.11 Standard Default distance is 20kmDhcp Server Configuration DNS Server ConfigurationSpanning Tree Algorithm / Redundancy Multiple AP Repeater Mesh Network 3A1582Rev1.6 Site B WDS Configuration Example Extending range using WDSExample Adding Redundancy Example Roaming with WDS Access Points3A1582Rev1.6 Example WDS Routed Network Mouse, to highlight the entire row Routing Rules WDS ConnectionsSTP Wireless Message Filtering Specifies a destination hostInformation at a later time 3A1582Rev1.6 MAC Address Filter Configuration IP Address Filter ConfigurationUtilize the radio link. All other devices are blocked ARP Filter Configuration RS-232 PPP Server Serial Port ConfigurationSerial Gateway Modbus Modbus RTU to TCP Serial Gateway Server/Client/MulticastSerial Menu Modbus TCP to RTU GatewayMulticast Pipe Manager To be the same on all communicating Multicast devices Digital Input/OutputPort on the Client, i.e., Scada, DCS, etc Multicast Group IP AddressModbus I/O Transfer 3A1582Rev1.6 Modbus TCP Configuration on I/O Transfer Menu Module Information Configuration Modbus TCP Client Mappings on I/O Transfer MenuModule Information Webpage Fields System Tools Remote ConfigurationConfiguration Examples Setting a BU-945U-E to Factory Default SettingsExtending a Wired Network Client 1 Configuration Client 2 ConfigurationLAN B Configuration Access Point Configuration Client ConfigurationExtending Range of a Network with a Repeater Hop RED Continuously Diagnostics ChartBoot Status LED Indication during Start-up LED Indicator Condition MeaningSite Survey Diagnostic Information AvailableConnectivity Connectivity ParametersNetwork Traffic Analysis Statistics5014 STA Only Internal Diagnostic Modbus Registers9999 Both Reset module enter Ffff to reset module Connection InformationStatistic Registers Testing Radio Paths UtilitiesPing 3A1582Rev1.6 Arp IpconfigRoute Serial Ports Power SupplyGeneral Radio TransceiverInput / Output status System ParametersAppendix a Firmware Upgrades Web-Based UpgradeDhcp ACKCSMA/CA CSMA/CDIeee IPX-SPXISN SSL SNRNAT NICWEP VoIPVPN WANDBm to mW Conversion Installation MaterialsIperf Applications 3A1582Rev1.6 JPerf Application 3A1582Rev1.6 Terms and Conditions Preamble3A1582Rev1.6 No Warranty 3A1582Rev1.6 Customer Assistance