Cooper Bussmann BU-945U-E 802.11 DSSS user manual Digital Input/Output, Multicast Group IP Address

Cooper Bussmann Wireless Ethernet & Device Server BU-945U-E 802.11 DSSS User Manual

Multicast Pipe Manager

Enabled	Enables or disables the Multicast Pipe manager.
Server Port	Server port used by the Multicast Pipe Manager. Will need to be configured the same as the
	Port on the Client, i.e., Scada, DCS, etc..
Multicast Group IP Address	Broadcast Address used when communicating to all other Multicast devices. This address will need
	to be the same on all communicating Multicast devices.
Multicast Group Port	Multicast Port used when communicating to all other Multicast devices. Will need to be the same
	on all communicating Multicast devices.

3.16 Digital Input/Output

The functionality of the shared Digital Input/Output pin may be configured via the “I/O Transfer” webpage. As this pin is shared, the Digital Input status will be ON when the Digital Output is set ON.

The Digital I/O channel can be transferred to/from another device using Modbus (see section “3.15 Modbus I/O Transfer”) or it can be configured to provide status of the module communications. If the BU-945U-E disassociates from another unit (that is, there is no wireless link), you can configure the digital output to turn ON (set) or OFF (drop).

48 www.cooperbussmann.com/BussmannWirelessResources 3A1582Rev1.6