Xerox DocuPrint C6 manual Printer Error Conditions, LED On Continuously

Page 20

Printer Error Conditions

LED Blinking Constantly (0.5 sec On, 0.5 sec Off)

A constantly blinking LED can indicate the following:

∙Low ink condition – Press and release the Printer Control button to center the print head. Replace the low ink cartridge. Press and release the Printer Control button to return the print head to the home position.

LED On Continuously

A continuously lit LED can indicate any of the following error messages:

∙Out of paper – Fill the paper tray. Press and release the Printer Control button to feed paper.

∙Paper Jam – Press and hold the Printer Control button for at least 2 seconds to clear the jam. If the paper fails to come out, follow the jam clearance procedure described on the Quick Reference Guide.

∙Incorrect Print Head Installed – Press and release the Printer Control button to center the print head. Replace the incorrect print head with the correct DocuPrint C6 print head.

∙Out of Ink - Press and release the Printer Control button to center the print head. Replace the empty ink cartridge with a new cartridge. Press and release the Printer Control button to return the print head to the home position.

12

Image 20

Contents DocuPrint C6 Inkjet Printer Publication number 701P31015 Customer Support Page Contents Troubleshooting the printer Selecting and Ordering Supplies IndexPage Introduction Safety notes Page Page Page Printer Registration Directions for On-Line RegistrationUnderstanding the Printer’s Features Hardware features Inside view of DocuPrint C6 Printer Rear view of DocuPrint C6 Printer Control Panel Operation LED OffPrinter Error Conditions LED On ContinuouslyLED Blinking Intermittently 0.2 sec On, 1.4 sec Off Printer specifications Feature SpecificationFeature Specification System Requirements Printable area / Margins Recommended PossiblePage From the Printers folder for Windows 95/98 Accessing printer settingsFrom a Windows software application Orientation Paper/Output PropertyCopies Collate Reverse printOrder Print documentSave As Saved settingsPrint quality Default All Defaults from the Saved settingsDelete StatusLayout Property Defaults Number of sheetsPrint crop marks Print sheetsSelect Sheets Page Multiple-up option Mirror Image NoneImage Quality Property ImageFixä∙ Fine dither ∙ Quality airbrush ∙ Sharp airbrush Red Document as is set to GreyscaleGreen BlueAbout Property Status Property Now printing Information areaCartridge Mimic Copy Percent completeMaintenance Property Change ∙ Previously used print cartridge Alignment Test Pattern if you want to CleanAlign Print the Alignment Test Pattern Checking the documents in the print queue Troubleshooting the printer Cause Suggested Solution Printed document is blank Cause Suggested Solution Document prints slowly Draft or NormalDocument sent to the printer does not print Front Panel LED is on continuously Page Front Panel LED is blinking slowly Front Panel LED is blinking intermittentlyPrint is blurry or jagged vertical lines appear Printed image is clipped or off the edge of the media Cause Suggested Solution Cause Suggested Solution Print is faint or missing To DraftInk is smeared on the printed pages Print quality of transparencies is poor Color variations appear in large areas of color Paper is not feeding properly Paper does not stack neatly in the paper output shelf Packing the printer for return to a Service Center Printer Page Selecting and Ordering Supplies Description Reorder Number Cartridges and print headsSelecting plain paper Paper weights Selecting specialty print mediaSelecting labels Selecting transparenciesSelecting banner paper Selecting envelopesIndex