Xerox DocuPrint C6 manual Cause Suggested Solution

Page 63

White horizontal lines and streaks of the wrong color appear on the printed pages

Cause

Suggested Solution

An ink cartridge is empty.

Replace the ink cartridge. Click the <Change> button on Maintenance property page, and then follow the instructions on the Quick Start Guide for replacing the ink cartridge.

An ink cartridge is clogged or defective, or the print head needs to be cleaned.

The printer is connected to a power strip.

Click the Cartridge <Clean> button in the Maintenance property page.

After cleaning the ink cartridge, run a test print by clicking the <Test> button in the Maintenance property page. If lines and streaks still appear, repeat the above process five more times. If the problem continues, contact the Xerox Customer Support Center.

The printer requires a small amount of power to maintain the print head. Either keep the power strip turned on at all times or connect the printer to a wall outlet.

The printer is overheated.	Open the printer cover. Wait one
	hour for the printer to cool.

The print cartridge remains in the storage box for long periods between use.

To properly maintain the stored cartridge, remove it from the storage box monthly, and use the cartridge to print a few pages before returning it to the box.

55

Image 63

Contents DocuPrint C6 Inkjet Printer Publication number 701P31015 Customer Support Page Contents Troubleshooting the printer Index Selecting and Ordering SuppliesPage Introduction Safety notes Page Page Page Directions for On-Line Registration Printer RegistrationUnderstanding the Printer’s Features Hardware features Inside view of DocuPrint C6 Printer Rear view of DocuPrint C6 Printer LED Off Control Panel OperationLED On Continuously Printer Error ConditionsLED Blinking Intermittently 0.2 sec On, 1.4 sec Off Feature Specification Printer specificationsFeature Specification System Requirements Recommended Possible Printable area / MarginsPage Accessing printer settings From a Windows software applicationFrom the Printers folder for Windows 95/98 Paper/Output Property CopiesOrientation Print document CollateReverse print OrderSaved settings Print qualitySave As Status Default AllDefaults from the Saved settings DeleteLayout Property Print sheets DefaultsNumber of sheets Print crop marksSelect Sheets Page Multiple-up option None Mirror ImageImageFixä Image Quality Property∙ Fine dither ∙ Quality airbrush ∙ Sharp airbrush Blue RedDocument as is set to Greyscale GreenAbout Property Status Property Information area Cartridge MimicNow printing Percent complete CopyMaintenance Property Change ∙ Previously used print cartridge Clean AlignAlignment Test Pattern if you want to Print the Alignment Test Pattern Checking the documents in the print queue Troubleshooting the printer Cause Suggested Solution Printed document is blank Cause Suggested Solution Draft or Normal Document prints slowlyDocument sent to the printer does not print Front Panel LED is on continuously Page Front Panel LED is blinking intermittently Front Panel LED is blinking slowlyPrint is blurry or jagged vertical lines appear Printed image is clipped or off the edge of the media Cause Suggested Solution Cause Suggested Solution To Draft Print is faint or missingInk is smeared on the printed pages Print quality of transparencies is poor Color variations appear in large areas of color Paper is not feeding properly Paper does not stack neatly in the paper output shelf Packing the printer for return to a Service Center Printer Page Selecting and Ordering Supplies Cartridges and print heads Selecting plain paperDescription Reorder Number Selecting specialty print media Paper weightsSelecting envelopes Selecting labelsSelecting transparencies Selecting banner paperIndex