Xerox DocuPrint C6 manual Information area, Cartridge Mimic, Now printing

Page 43

If the printer is idle, you can check its status by clicking the <Start> button, pointing to Settings, and clicking Printers. Click the DocuPrint C6 icon with the right mouse button. With the left mouse button, click Show Status window (Windows 95/98 only).

These are the Status property page features and settings:

Information area	This area is at the top of the screen and
	consists of a printer icon and a message
	area. The message area is used to report
	device warnings and errors. The text in
	the message area reports low ink, out of
	ink, out of paper, wrong print head, etc.,
	as well as information to remedy the
	problem.
Cartridge Mimic	This image shows the currently installed
	print cartridge and the levels of ink in
	the cartridges. The color/photo print
	cartridge is the only option available. If
	one of the individual ink cartridges is
	low, a warning symbol appears on the
	mimic (a mini yellow triangle with an
	exclamation point).
	If an ink cartridge is empty, missing, or
	installed incorrectly, an error symbol
	appears (a mini red circle with a
	white X).
Now printing	Indicates the name of the job being
	printed. The actual text is supplied by
	the application that requested the print
	job.

35

Image 43

Contents DocuPrint C6 Inkjet Printer Publication number 701P31015 Customer Support Page Contents Troubleshooting the printer Index Selecting and Ordering SuppliesPage Introduction Safety notes Page Page Page Directions for On-Line Registration Printer RegistrationUnderstanding the Printer’s Features Hardware features Inside view of DocuPrint C6 Printer Rear view of DocuPrint C6 Printer LED Off Control Panel OperationLED On Continuously Printer Error ConditionsLED Blinking Intermittently 0.2 sec On, 1.4 sec Off Feature Specification Printer specificationsFeature Specification System Requirements Recommended Possible Printable area / MarginsPage From a Windows software application Accessing printer settingsFrom the Printers folder for Windows 95/98 Copies Paper/Output PropertyOrientation Print document CollateReverse print OrderPrint quality Saved settingsSave As Status Default AllDefaults from the Saved settings DeleteLayout Property Print sheets DefaultsNumber of sheets Print crop marksSelect Sheets Page Multiple-up option None Mirror ImageImageFixä Image Quality Property∙ Fine dither ∙ Quality airbrush ∙ Sharp airbrush Blue RedDocument as is set to Greyscale GreenAbout Property Status Property Cartridge Mimic Information areaNow printing Percent complete CopyMaintenance Property Change ∙ Previously used print cartridge Align CleanAlignment Test Pattern if you want to Print the Alignment Test Pattern Checking the documents in the print queue Troubleshooting the printer Cause Suggested Solution Printed document is blank Cause Suggested Solution Draft or Normal Document prints slowlyDocument sent to the printer does not print Front Panel LED is on continuously Page Front Panel LED is blinking intermittently Front Panel LED is blinking slowlyPrint is blurry or jagged vertical lines appear Printed image is clipped or off the edge of the media Cause Suggested Solution Cause Suggested Solution To Draft Print is faint or missingInk is smeared on the printed pages Print quality of transparencies is poor Color variations appear in large areas of color Paper is not feeding properly Paper does not stack neatly in the paper output shelf Packing the printer for return to a Service Center Printer Page Selecting and Ordering Supplies Selecting plain paper Cartridges and print headsDescription Reorder Number Selecting specialty print media Paper weightsSelecting envelopes Selecting labelsSelecting transparencies Selecting banner paperIndex