Xerox DocuPrint C6 manual Information area, Change

Page 46

All the buttons on the Maintenance property page are disabled if a job is being printed.

The following are the Maintenance property page features and settings:

Information area	This area is at the top of the screen and
	consists of an icon and a message area.
	The message area is used to report
	device warnings and errors. The text in
	the message area reports low ink, out of
	ink, out of paper, wrong print head, etc.,
	as well as information about the
	problem.
Cartridge Mimic	This image shows the currently installed
	print cartridge and the levels of ink in
	the cartridges.
	If an ink cartridge is empty, missing, or
	installed incorrectly, an error symbol
	appears (a mini red circle with a white
	X).
Change	Moves the print cartridge to the center
	position so you can remove it. A dialog
	box gives additional instructions for
	removing the cartridge. If the print
	cartridge is not in the center of the
	carriage, click the <Cancel>button and
	invoke this dialog box again.
	Select what you are installing from the
	displayed options.

38

Image 46

Contents DocuPrint C6 Inkjet Printer Publication number 701P31015 Customer Support Page Contents Troubleshooting the printer Selecting and Ordering Supplies IndexPage Introduction Safety notes Page Page Page Printer Registration Directions for On-Line RegistrationUnderstanding the Printer’s Features Hardware features Inside view of DocuPrint C6 Printer Rear view of DocuPrint C6 Printer Control Panel Operation LED OffPrinter Error Conditions LED On ContinuouslyLED Blinking Intermittently 0.2 sec On, 1.4 sec Off Printer specifications Feature SpecificationFeature Specification System Requirements Printable area / Margins Recommended PossiblePage From a Windows software application Accessing printer settingsFrom the Printers folder for Windows 95/98 Copies Paper/Output PropertyOrientation Order CollateReverse print Print documentPrint quality Saved settingsSave As Delete Default AllDefaults from the Saved settings StatusLayout Property Print crop marks DefaultsNumber of sheets Print sheetsSelect Sheets Page Multiple-up option Mirror Image NoneImage Quality Property ImageFixä∙ Fine dither ∙ Quality airbrush ∙ Sharp airbrush Green RedDocument as is set to Greyscale BlueAbout Property Status Property Cartridge Mimic Information areaNow printing Copy Percent completeMaintenance Property Change ∙ Previously used print cartridge Align CleanAlignment Test Pattern if you want to Print the Alignment Test Pattern Checking the documents in the print queue Troubleshooting the printer Cause Suggested Solution Printed document is blank Cause Suggested Solution Document prints slowly Draft or NormalDocument sent to the printer does not print Front Panel LED is on continuously Page Front Panel LED is blinking slowly Front Panel LED is blinking intermittentlyPrint is blurry or jagged vertical lines appear Printed image is clipped or off the edge of the media Cause Suggested Solution Cause Suggested Solution Print is faint or missing To DraftInk is smeared on the printed pages Print quality of transparencies is poor Color variations appear in large areas of color Paper is not feeding properly Paper does not stack neatly in the paper output shelf Packing the printer for return to a Service Center Printer Page Selecting and Ordering Supplies Selecting plain paper Cartridges and print headsDescription Reorder Number Paper weights Selecting specialty print mediaSelecting banner paper Selecting labelsSelecting transparencies Selecting envelopesIndex