Xerox DocuPrint C6 manual Clean, Alignment Test Pattern if you want to

Page 48

Clean	Cleans the currently installed print
	cartridge. Before clicking the <Clean>
	button, make sure the printer is idle.
Align	Prints a test pattern that you can use to
	verify the optimum bi-directional
	alignment of the print head in the
	printer.
	To align the cartridge, wait for the
	printer to completely print the alignment
	test page. Look over the nine individual
	vertical alignment patterns. Determine
	which pattern has the straightest lines.
	If pattern zero (“0”) has the straightest
	lines, then there is no need to adjust the
	alignment. Click <Done> to exit the
	dialog.
	If a pattern other than zero has the
	straightest lines, then select that pattern
	on the dialog box. Select Print the
	Alignment Test Pattern if you want to
	verify the adjustment, then click
	<Align>. If you are not verifying the
	adjustment, click <Done>.

40

Image 48

Contents DocuPrint C6 Inkjet Printer Publication number 701P31015 Customer Support Page Contents Troubleshooting the printer Selecting and Ordering Supplies IndexPage Introduction Safety notes Page Page Page Printer Registration Directions for On-Line RegistrationUnderstanding the Printer’s Features Hardware features Inside view of DocuPrint C6 Printer Rear view of DocuPrint C6 Printer Control Panel Operation LED OffPrinter Error Conditions LED On ContinuouslyLED Blinking Intermittently 0.2 sec On, 1.4 sec Off Printer specifications Feature SpecificationFeature Specification System Requirements Printable area / Margins Recommended PossiblePage Accessing printer settings From a Windows software applicationFrom the Printers folder for Windows 95/98 Paper/Output Property CopiesOrientation Collate Reverse printOrder Print documentSaved settings Print qualitySave As Default All Defaults from the Saved settingsDelete StatusLayout Property Defaults Number of sheetsPrint crop marks Print sheetsSelect Sheets Page Multiple-up option Mirror Image NoneImage Quality Property ImageFixä∙ Fine dither ∙ Quality airbrush ∙ Sharp airbrush Red Document as is set to GreyscaleGreen BlueAbout Property Status Property Information area Cartridge MimicNow printing Copy Percent completeMaintenance Property Change ∙ Previously used print cartridge Clean AlignAlignment Test Pattern if you want to Print the Alignment Test Pattern Checking the documents in the print queue Troubleshooting the printer Cause Suggested Solution Printed document is blank Cause Suggested Solution Document prints slowly Draft or NormalDocument sent to the printer does not print Front Panel LED is on continuously Page Front Panel LED is blinking slowly Front Panel LED is blinking intermittentlyPrint is blurry or jagged vertical lines appear Printed image is clipped or off the edge of the media Cause Suggested Solution Cause Suggested Solution Print is faint or missing To DraftInk is smeared on the printed pages Print quality of transparencies is poor Color variations appear in large areas of color Paper is not feeding properly Paper does not stack neatly in the paper output shelf Packing the printer for return to a Service Center Printer Page Selecting and Ordering Supplies Cartridges and print heads Selecting plain paperDescription Reorder Number Paper weights Selecting specialty print mediaSelecting labels Selecting transparenciesSelecting banner paper Selecting envelopesIndex