Xerox DocuPrint C6 manual Front Panel LED is on continuously

Page 57

The Front Panel LED is on continuously

Cause

Suggested Solution

The printer is out of paper.

Add paper to the paper tray. Then, press and release the Printer Control (green) button.

The print head is not installed correctly.

Press and release the Printer Control (green) button to center the print carriage. Remove, then reinstall the print head. Press and release the Printer Control button to return to the home position.

A carriage position error	Open the printer cover and clear
occurred.	any obstructions in the print head
	path, such as packaging material.
	Press and release the Printer
	Control (green) button to clear
	the error and eject the paper.
A paper feed error occurred.	Clear the paper jam. Refer to the
	Printer Driver Online Help or to
	the Quick Reference Guide for
	more information.
An internal printer error	Press and hold the Printer
occurred.	Control (green) button for at
	least two seconds. If the problem
	persists, unplug the power cord
	from the printer, wait at least ten
	seconds, and then reconnect it.
	If the problem continues, contact
	the Xerox Customer Support
	Center.

49

Image 57

Contents DocuPrint C6 Inkjet Printer Publication number 701P31015 Customer Support Page Contents Troubleshooting the printer Index Selecting and Ordering SuppliesPage Introduction Safety notes Page Page Page Directions for On-Line Registration Printer RegistrationUnderstanding the Printer’s Features Hardware features Inside view of DocuPrint C6 Printer Rear view of DocuPrint C6 Printer LED Off Control Panel OperationLED On Continuously Printer Error ConditionsLED Blinking Intermittently 0.2 sec On, 1.4 sec Off Feature Specification Printer specificationsFeature Specification System Requirements Recommended Possible Printable area / MarginsPage Accessing printer settings From a Windows software applicationFrom the Printers folder for Windows 95/98 Paper/Output Property CopiesOrientation Reverse print CollateOrder Print documentSaved settings Print qualitySave As Defaults from the Saved settings Default AllDelete StatusLayout Property Number of sheets DefaultsPrint crop marks Print sheetsSelect Sheets Page Multiple-up option None Mirror ImageImageFixä Image Quality Property∙ Fine dither ∙ Quality airbrush ∙ Sharp airbrush Document as is set to Greyscale RedGreen BlueAbout Property Status Property Information area Cartridge MimicNow printing Percent complete CopyMaintenance Property Change ∙ Previously used print cartridge Clean AlignAlignment Test Pattern if you want to Print the Alignment Test Pattern Checking the documents in the print queue Troubleshooting the printer Cause Suggested Solution Printed document is blank Cause Suggested Solution Draft or Normal Document prints slowlyDocument sent to the printer does not print Front Panel LED is on continuously Page Front Panel LED is blinking intermittently Front Panel LED is blinking slowlyPrint is blurry or jagged vertical lines appear Printed image is clipped or off the edge of the media Cause Suggested Solution Cause Suggested Solution To Draft Print is faint or missingInk is smeared on the printed pages Print quality of transparencies is poor Color variations appear in large areas of color Paper is not feeding properly Paper does not stack neatly in the paper output shelf Packing the printer for return to a Service Center Printer Page Selecting and Ordering Supplies Cartridges and print heads Selecting plain paperDescription Reorder Number Selecting specialty print media Paper weightsSelecting transparencies Selecting labelsSelecting banner paper Selecting envelopesIndex