Xerox DocuPrint C6 manual Delete, Status, Default All, Defaults from the Saved settings

Page 31

	To use the <Save As> button:
	1. Select the settings you want on
	the Paper/Output, Page
	Layout, and Image Quality
	property pages.
	2. On the Paper/Output property
	page, click the <Save As>
	button.
	3. Type a name in the Save As
	dialog box.
	4. Click <Save> in the dialog
	box.
Delete	Deletes the currently selected
	Saved setting file.
Status	Displays the Status window. If the
	Status window is already running, it
	will be brought to the foreground.
Default All	Sets all controls on all property
	pages to their factory defaults. This
	function is the same as: Printer
	defaults from the Saved settings
	control. (See Saved settings,
	above).

Device mimic (printer illustration in lower left corner)

This is a bitmap image of the printer. This image will change when certain settings are changed (for example, paper size).

23

Image 31

Contents DocuPrint C6 Inkjet Printer Publication number 701P31015 Customer Support Page Contents Troubleshooting the printer Index Selecting and Ordering SuppliesPage Introduction Safety notes Page Page Page Directions for On-Line Registration Printer RegistrationUnderstanding the Printer’s Features Hardware features Inside view of DocuPrint C6 Printer Rear view of DocuPrint C6 Printer LED Off Control Panel OperationLED On Continuously Printer Error ConditionsLED Blinking Intermittently 0.2 sec On, 1.4 sec Off Feature Specification Printer specificationsFeature Specification System Requirements Recommended Possible Printable area / MarginsPage From a Windows software application Accessing printer settingsFrom the Printers folder for Windows 95/98 Copies Paper/Output PropertyOrientation Print document CollateReverse print OrderPrint quality Saved settingsSave As Status Default AllDefaults from the Saved settings DeleteLayout Property Print sheets DefaultsNumber of sheets Print crop marksSelect Sheets Page Multiple-up option None Mirror ImageImageFixä Image Quality Property∙ Fine dither ∙ Quality airbrush ∙ Sharp airbrush Blue RedDocument as is set to Greyscale GreenAbout Property Status Property Cartridge Mimic Information areaNow printing Percent complete CopyMaintenance Property Change ∙ Previously used print cartridge Align CleanAlignment Test Pattern if you want to Print the Alignment Test Pattern Checking the documents in the print queue Troubleshooting the printer Cause Suggested Solution Printed document is blank Cause Suggested Solution Draft or Normal Document prints slowlyDocument sent to the printer does not print Front Panel LED is on continuously Page Front Panel LED is blinking intermittently Front Panel LED is blinking slowlyPrint is blurry or jagged vertical lines appear Printed image is clipped or off the edge of the media Cause Suggested Solution Cause Suggested Solution To Draft Print is faint or missingInk is smeared on the printed pages Print quality of transparencies is poor Color variations appear in large areas of color Paper is not feeding properly Paper does not stack neatly in the paper output shelf Packing the printer for return to a Service Center Printer Page Selecting and Ordering Supplies Selecting plain paper Cartridges and print headsDescription Reorder Number Selecting specialty print media Paper weightsSelecting envelopes Selecting labelsSelecting transparencies Selecting banner paperIndex