Xerox DocuPrint C6 manual Control Panel Operation, LED Off

Page 19

Control Panel Operation

The DocuPrint C6 control panel has one button and one light (LED).

The Printer Control (green) button controls printer functions. The one LED light displays the condition of the printer.

Normal Printer Operation

LED Off

With the LED light off, these operations can be performed:

∙To center the print head so you can replace a print cartridge – Press and hold the Printer Control button for at least 2 seconds. The print head will move to the center of the printer. Replace the print head (see the Quick Start Guide), then press and release the Printer Control button to return the print head to the home position.

∙To manually feed paper – Press and release the Printer Control button.

∙To manually advance paper – After manually feeding paper into the printer, press and release the Printer Control button for each line feed.

∙To eject paper – Press and hold the Printer Control button for at least 2 seconds.

∙To print a test page – Unplug the power cord from the rear of the unit. While pressing the Printer Control button, reinsert the power cord into the back of the unit and continue to hold the Printer Control button until the print head starts to move.

11

Image 19

Contents DocuPrint C6 Inkjet Printer Publication number 701P31015 Customer Support Page Contents Troubleshooting the printer Index Selecting and Ordering SuppliesPage Introduction Safety notes Page Page Page Directions for On-Line Registration Printer RegistrationUnderstanding the Printer’s Features Hardware features Inside view of DocuPrint C6 Printer Rear view of DocuPrint C6 Printer LED Off Control Panel OperationLED On Continuously Printer Error ConditionsLED Blinking Intermittently 0.2 sec On, 1.4 sec Off Feature Specification Printer specificationsFeature Specification System Requirements Recommended Possible Printable area / MarginsPage From a Windows software application Accessing printer settingsFrom the Printers folder for Windows 95/98 Copies Paper/Output PropertyOrientation Print document CollateReverse print OrderPrint quality Saved settingsSave As Status Default AllDefaults from the Saved settings DeleteLayout Property Print sheets DefaultsNumber of sheets Print crop marksSelect Sheets Page Multiple-up option None Mirror ImageImageFixä Image Quality Property∙ Fine dither ∙ Quality airbrush ∙ Sharp airbrush Blue RedDocument as is set to Greyscale GreenAbout Property Status Property Cartridge Mimic Information areaNow printing Percent complete CopyMaintenance Property Change ∙ Previously used print cartridge Align CleanAlignment Test Pattern if you want to Print the Alignment Test Pattern Checking the documents in the print queue Troubleshooting the printer Cause Suggested Solution Printed document is blank Cause Suggested Solution Draft or Normal Document prints slowlyDocument sent to the printer does not print Front Panel LED is on continuously Page Front Panel LED is blinking intermittently Front Panel LED is blinking slowlyPrint is blurry or jagged vertical lines appear Printed image is clipped or off the edge of the media Cause Suggested Solution Cause Suggested Solution To Draft Print is faint or missingInk is smeared on the printed pages Print quality of transparencies is poor Color variations appear in large areas of color Paper is not feeding properly Paper does not stack neatly in the paper output shelf Packing the printer for return to a Service Center Printer Page Selecting and Ordering Supplies Selecting plain paper Cartridges and print headsDescription Reorder Number Selecting specialty print media Paper weightsSelecting envelopes Selecting labelsSelecting transparencies Selecting banner paperIndex