Xerox DocuPrint C6 manual Selecting labels, Selecting transparencies, Selecting banner paper

Page 76

Selecting labels

Use only paper face label stock. Ink will not dry on vinyl, plastic, or clear label stock. Individual labels will not feed properly. Letter or A4 sheet size for the labels is required at a minimum. For best results, use labels designed for an ink jet printer. The maximum quantity the tray can accommodate is 50 sheets.

Do not use any label material that is partially used, folded, curled, or wrinkled.

Selecting transparencies

Use transparencies designed for ink jet printers only. Do not use paper-backed transparencies. Refer to the instructions for the transparency to see which side is the printable side.

Selecting banner paper

Use any banner paper designed for ink jet printers. Do not use track-fed paper or paper in rolls. The C6 printer can accommodate single 8.5 x 55 in. or 210 mm. x 1485 mm. sheets.

Selecting envelopes

Most short flap envelopes work well in the printer, although some variables in paper composition may affect print quality. Fully test an envelope before purchasing large quantities.

68

Image 76

Contents DocuPrint C6 Inkjet Printer Publication number 701P31015 Customer Support Page Contents Troubleshooting the printer Selecting and Ordering Supplies IndexPage Introduction Safety notes Page Page Page Printer Registration Directions for On-Line RegistrationUnderstanding the Printer’s Features Hardware features Inside view of DocuPrint C6 Printer Rear view of DocuPrint C6 Printer Control Panel Operation LED OffPrinter Error Conditions LED On ContinuouslyLED Blinking Intermittently 0.2 sec On, 1.4 sec Off Printer specifications Feature SpecificationFeature Specification System Requirements Printable area / Margins Recommended PossiblePage From a Windows software application Accessing printer settingsFrom the Printers folder for Windows 95/98 Copies Paper/Output PropertyOrientation Collate Reverse printOrder Print documentPrint quality Saved settingsSave As Default All Defaults from the Saved settingsDelete StatusLayout Property Defaults Number of sheetsPrint crop marks Print sheetsSelect Sheets Page Multiple-up option Mirror Image NoneImage Quality Property ImageFixä∙ Fine dither ∙ Quality airbrush ∙ Sharp airbrush Red Document as is set to GreyscaleGreen BlueAbout Property Status Property Cartridge Mimic Information areaNow printing Copy Percent completeMaintenance Property Change ∙ Previously used print cartridge Align CleanAlignment Test Pattern if you want to Print the Alignment Test Pattern Checking the documents in the print queue Troubleshooting the printer Cause Suggested Solution Printed document is blank Cause Suggested Solution Document prints slowly Draft or NormalDocument sent to the printer does not print Front Panel LED is on continuously Page Front Panel LED is blinking slowly Front Panel LED is blinking intermittentlyPrint is blurry or jagged vertical lines appear Printed image is clipped or off the edge of the media Cause Suggested Solution Cause Suggested Solution Print is faint or missing To DraftInk is smeared on the printed pages Print quality of transparencies is poor Color variations appear in large areas of color Paper is not feeding properly Paper does not stack neatly in the paper output shelf Packing the printer for return to a Service Center Printer Page Selecting and Ordering Supplies Selecting plain paper Cartridges and print headsDescription Reorder Number Paper weights Selecting specialty print mediaSelecting labels Selecting transparenciesSelecting banner paper Selecting envelopesIndex