PRINTER OVERVIEW
Operator Panel & Status Display
The operator panel is located on top of the front side of the printer. It consists of a graphic display, a message display and several function keys.
1 | 2 | 3 | 4 | 5 | 15 |
|
| Paper Deck | MF | Exit |
|
|
| |||
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
| |
|
| 1 | 2 | 3 | 4 | D1 | PF |
|
|
|
|
|
|
|
|
| D2 |
|
|
| |
Select |
| Cut | Copy Density | Menu | Enter | Online | ||||
|
|
|
|
|
| D3 | D4 |
|
|
|
6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 |
|
|
14 | |||||||||
1. | Ready Indicator |
| Flashes when the printer is warming up, and remains on steady | ||||||
|
|
|
|
| when the printer is ready to operate. |
|
| ||
2.Door Open Indicator This indicator flashes and an error code is displayed when a door is opened, or the Inner Transport Unit is opened.
3.Toner Empty Indicator This indicator flashes when the toner level is low.
When the toner supply is empty, the indicator is on steady and no more prints can be made.
You can replace the Toner cartridge even if the printer is operating.
4.Media Empty Indicator This indicator flashes when the selected media roll is depleted.
5.Media Jam Indicator This indicator flashes when media is jammed in the printer.
6. | The Charge Scorotron Wire is cleaned when this key is pressed. | |
|
| The Ready Indicator flashes during the cleaning process. |
7. | Lens Array of LED Print Head is cleaned when this button is | |
|
| pressed. Ready Indicator flashes during the cleaning process. |
8.Media Roll Indicator Displays the selected media roll for lead edge cut when the SELECT key is pressed.
9. | Select key | Press this key to select the media roll desired for a lead edge cut. |
10. | Cut key | Press this key to feed and cut 240mm of the lead edge of the |
|
| selected roll. |
11.Media Jam Location Indicator
12.Copy Density Indicator
13.Copy Density Key
14. Menu, , , *, Enter,
Online
15. Status Display
Indicates the location where Jam has occurred.
The selected Print Density level is illuminated.
Use this key to temporarily increase or decrease the image density.
These keys are used for changing User Modes described in Chapter 7. The Online Key is also used to place the printer Offline and Online.
Error Codes, Status Codes and messages are displayed here.
XEROX WIDE FORMAT 721P PRINTER OPERATOR MANUAL | 13 |