Xerox 721P manual Adding Media Rolls

4.Media

This chapter provides the following information:

￿The procedure for loading roll media into the media drawers

￿The procedure for bypassing the media drawers and manually feeding pre-cut sheets into the printer

￿An explanation of the dehumidifier feature.

For information about the media sizes and types that the printer can accommodate, refer to the "Specification" chapter of this manual.

Adding Media Rolls

When roll media in use is empty, the Media Empty Indicator on the

Operation Panel remains on steady.

To load a new roll media, follow the instructions in the "Loading

The Roll Media" sections of this chapter.

NOTE: Roll sizes 880 mm, 891 mm and 900 mm can be loaded in Media Drawer 1 only. The printer is set for 900 mm size. To enable 880 mm or 891 mm sizes, contact XEROX Service.

NOTE: B3 media should not be loaded in drawer 1. If B3 media is loaded in drawer 1, the printer will report the size as either A3 or 11” media.

Media Empty Indicator

		Paper Deck				MF	Exit
		1	2	3	4	D1	PF
Wire-Clean	Exp-Clean					D2
		Select			Cut		Copy Density	Menu	Enter	Online
						D3	D4

XEROX WIDE FORMAT 721P PRINTER OPERATOR MANUAL 17