Xerox 721P manual Clearing Media Jam J-11 & J-12

				PROBLEM SOLVING
Clearing Media Jam (J-11 & J-12)
	When a jam J-11 occurs, the media jams on the Inner Transport
	Assembly.
MF		Exit
D1		PF
D2
		Copy Density	Menu	Enter	Online
D3		D4
	When a jam J-12 occurs, the media jams underneath the Drum.
MF		Exit
D1		PF
D2
		Copy Density	Menu	Enter	Online
D3		D4
Fuser	1. Open the Right Side Door and turn the Inner Transport
Handle		Assembly handle to release the transport. Lower and lock the
		transport by engaging the Down Lock.
Cutter	2. If the media is not cut and the leading edge of the media has
		reached the Drum or beyond the Drum, rotate the Cutter
handle
		handle to cut the media. Continue rotating the cutter handle
		so that the green home position indicator appears in the cut
		out.
Inner Transport handle	3.	Open the Manual Bypass Shelf, Drawer 1 and Drawer 2 in
Down Lock		order to clear the jammed media.
	4. If the leading edge of the media has reached the Fuser Unit,
		open the Exit Cover and remove the jammed media by
		rotating the Fuser Handle.
	5. Release the Down Lock while holding the handle of Inner
		Transport Assembly and lift it up gently until it stops. Then
		twist the handle to the left to move the transport to the home
		position. Finally, turn the handle to the right to lock the
		transport.
	6. Rewind the jammed roll until the lead edge of the media
		comes free of the feed rollers.

XEROX WIDE FORMAT 721P PRINTER OPERATOR MANUAL 41