Denon DCM-5001 manual Mode switch setting with daisy chain connection, Main unit DCM-5000setting

ENGLISH

Mode switch setting with daisy chain connection

Set the mode switches of the different components as described on the tables below.

Main unit (DCM-5000) setting

Switch setting

SW1 SW2 SW3 SW4

Setting (ID No.)

Disc no. assignment

1

0

0

0

Main unit of a daisy chain

1 ~ 100

Sub unit (DCM-5001) setting

	Switch setting
				Setting (ID No.)	Disc no. assignment
SW1	SW2	SW3	SW4
0	0	0	1	1st sub unit in daisy chain	101 ~ 200
0	0	1	0	2nd sub unit in daisy chain	201 ~ 300
0	0	1	1	3rd sub unit in daisy chain	301 ~ 400
0	1	0	0	4th sub unit in daisy chain	401 ~ 500
0	1	0	1	5th sub unit in daisy chain	501 ~ 600

*Be sure to make the above settings. Be sure to set the DCM-5000 as the main unit. The first sub unit (the sub unit connected after the main unit) must be set to “0001”. It cannot be set as the second or third sub unit.

It is also not possible to skip numbers in the middle. The sub unit connected after the first sub unit must be set to the ID number for the second sub unit.

*If the mode switches are set wrong, the system cannot be operated normaly.

Example: For the 3rd sub unit

DCM-5000 DCM-5001 DCM-5001 DCM-5001

1st sub unit

2nd sub unit

3rd sub unit

“1000”“0001”“0010”“0011”

13