Tripp Lite MT-SE-37/02 owner manual Status LEDs

SNMP Solo

Network connection ports—SNMP Solo provides a BNC connector for 10Base-2 connection and a UTP (RJ-45) connector for 10Base-T networks.

Power connection port–SNMP Solo provides a connector for a 9VDC power supply.

The following illustration shows the serial port and the DIP switch. The serial port serves two purposes—adapter configuration and UPS communication.

Figure 3 SNMP Solo Serial Port Panel

Status LEDs

The LED indicators inform you of network activity, which is the green LNK light, and the UPS status, which is the red ERR light.

DIP Switches

Use the DIP switch to configure with a dumb terminal or to communicate with the UPS for status monitoring.

4SNMP Solo Package